Standard Interpretations
OSHA requirements are set by statute, standards, and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. Each letter constitutes OSHA's interpretation of the requirements discussed. Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information.
- 1910.212 - "Eyelet" and "four-slide" machines are covered by 1910.212. - 09/17/1993
- 1910.212 - Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools - 03/25/1985
- 1910.212 - Applicability of the Machine Guarding and Lockout/Tagout standards to printing presses - 06/14/1993
- 1910.212 - Are Seybolt Cutter subject to machine guarding requirements. - 03/25/1992
- 1910.212 - Calendar stacks used in the pulp and paper industry - 05/01/1991
- 1910.212 - Clarification of employers' use of floor fans. - 08/01/1996
- 1910.212 - Clarification of head room requirements for emergency doors and machine guarding. - 12/08/1975
- 1910.212 - Compliance policy on unguarded rotary knives used in poultry processing industries - 11/19/1992
- 1910.212 - Concerning power press brake operations. - 11/07/1991
- 1910.212 - Displeasure with the procedures utilized by OSHA. - 11/10/1976
- 1910.212 - Extent to which safety mats provide for compliance with OSHA regulations for machine guarding. - 03/22/1984
- 1910.212 - Feasibility of Guarding ESCO Swaging Presses. - 09/07/1990
- 1910.212 - Garb-el Food Waste Disposal Unit. - 07/14/1975
- 1910.212 - General requirements for all machines - 06/10/2013
- 1910.212 - Guarding and the use of abrasive wheels in CNC contouring machines. - 05/16/2008
- 1910.212 - Guarding machines on moveable benches and pedestals - 05/08/2012
- 1910.212 - Guarding of Alligators Shears. - 06/24/1981
- 1910.212 - Guarding of Unused portion of metal cutting bandsaws. - 01/07/1992
- 1910.212 - Guarding requirements for package tying machines. - 07/01/1985
- 1910.212 - Guarding/hazards of using woodcutting sawblades on a cut-off machine - 11/15/1999
- 1910.212 - Guards for Belt and Shaft Drives on Blow Motors - 05/08/2023
- 1910.212 - Interlock requirements for access door(s) of trash compactor. - 01/18/2006
- 1910.212 - Interlock requirements for centrifuges. - 04/14/1993
- 1910.212 - Machine anchoring requirements as it may apply to the dental polishing lathes. - 09/04/1996
- 1910.212 - Machine anchoring requirements. - 05/19/1981
- 1910.212 - Machine guarding and exposure to hazards from robotic laundry shuttles. - 07/07/2005
- 1910.212 - Machine guarding for the food processing industry. - 09/12/1991
- 1910.212 - Machine guarding requirements as it applies to centrifuges. - 04/20/1993
- 1910.212 - Machine Guarding Standard. - 03/29/1996
- 1910.212 - Machine-guarding requirements - 12/20/1994
- 1910.212 - Maximum permissible guard openings for blade guards on cooling fans - 08/21/2003
- 1910.212 - Meat grinder standards. - 01/28/1982
- 1910.212 - National Policy on Guarding Roving Frames - 02/13/1981
- 1910.212 - Oil Rig Inspection. - 12/15/1980
- 1910.212 - Pneumatically operated staplers. - 05/14/1979
- 1910.212 - Point of Operation Guarding, As Applied To The Dvorak Model 314 Iron Worker. - 07/01/1977
- 1910.212 - Power press brake used as a mechanical power press (punch press). - 09/23/1980
- 1910.212 - Power Press Brakes. - 04/20/1986
- 1910.212 - Power press brakes. - 06/09/1981
- 1910.212 - Power Presses of the Powder Metal Industry. - 07/23/1986
- 1910.212 - Printing Presses: requirements for normal production and servicing operations - 09/16/1992
- 1910.212 - Proposed modifications to the Biro All-Purpose Cutter. - 09/29/1976
- 1910.212 - Radial saw guards and table saw guarding systems. - 07/10/1990
- 1910.212 - Safeguarding of Metal Cutting Do-All Saw at the Norfolk Naval Shipyard. - 10/07/1987
- 1910.212 - Safeguarding of power press brakes and a definition of "Safe Distance". - 05/27/1986
- 1910.212 - Several questions regarding OSHA's LOTO and Bakery standards 29 CFR 1910.147 and 1910.263. - 08/25/2006
- 1910.212 - Sewing machine guards. - 05/20/1976
- 1910.212 - Solid State Electronic AC Motor Brakes. - 05/24/1990
- 1910.212 - Speed-Sensing Machine Guards - 08/22/2012
- 1910.212 - Standard applicable to paper and plastic shredder machines. - 07/12/1985
- 1910.212 - Standards for mechanical power presses. - 02/22/1978
- 1910.212 - The adequate guarding of a process pump. - 05/15/1995
- 1910.212 - The applicability of the standards to mechanical goods presses. - 07/17/1975
- 1910.212 - The blade guard on the Biro All Purpose Cutter. - 11/16/1978
- 1910.212 - The guarding requirements for riveting machines. - 12/13/1976
- 1910.212 - The point of operation guarding on the Biro Power Meat Cutters (bandsaws). - 10/11/1977
- 1910.212 - The point of operation hazard on power brakes. - 03/21/1977
- 1910.212 - The safe use of portable, compressed-air-actuated, fastener driving tools (staple guns) - 08/08/1986
- 1910.212 - The safeguarding of piece parts being worked on an outside diameter (O.D.) surface grinder. - 06/10/1983
- 1910.212 - Use of laser guarding systems with hydraulic press brakes - 02/11/2004
- 1910.212 - Whether or not guards are required for fan blades on an electrical transformer. - 01/08/1992
- 1910.212(a) - Characteristics of the Quick-Link device for the replacement of tire chain links. - 07/29/1991
- 1910.212(a) - Guarding and the use of abrasive wheels in CNC contouring machines. - 05/16/2008
- 1910.212(a)(1) - Acceptable guarding for continuous cycling boneless meat tenderizers. - 11/02/1987
- 1910.212(a)(1) - Appropriate guarding of lathe chucks. - 01/26/1979
- 1910.212(a)(1) - Guarding requirements and options for packaging and pelletizing machines. - 12/08/1999
- 1910.212(a)(1) - Machine Guarding - 03/04/1991
- 1910.212(a)(1) - Machine guarding and exposure to hazards from robotic laundry shuttles. - 07/07/2005
- 1910.212(a)(1) - Machine guarding for drilling operations. - 03/21/1990
- 1910.212(a)(1) - Oil Rig Inspection. - 12/15/1980
- 1910.212(a)(1) - OSHA enforcement policy on vertical food mixers. - 02/26/1999
- 1910.212(a)(1) - Point-of-operation guards for drill presses and lathes. - 10/15/1990
- 1910.212(a)(1) - Requirements for guarding points of operation and belts on heavy duty sewing machines - 07/09/1991
- 1910.212(a)(1) - Riding of vertical reciprocating conveyors is prohibited. - 07/30/1984
- 1910.212(a)(1) - The feasibility of OSHA's machine guarding requirements in their workplace. - 08/03/1989
- 1910.212(a)(1) - Use of laser guarding systems with hydraulic press brakes - 02/11/2004
- 1910.212(a)(2) - Oil Rig Inspection. - 12/15/1980
- 1910.212(a)(2) - Several questions regarding OSHA's LOTO and Bakery standards 29 CFR 1910.147 and 1910.263. - 08/25/2006
- 1910.212(a)(3) - Use of laser guarding systems with hydraulic press brakes - 02/11/2004
- 1910.212(a)(3)(ii) - Acceptable guarding for continuous cycling boneless meat tenderizers. - 11/02/1987
- 1910.212(a)(3)(ii) - Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools - 03/25/1985
- 1910.212(a)(3)(ii) - Clarification of Scope of OSHA Instruction STD 1-12.22 - 04/15/1991
- 1910.212(a)(3)(ii) - Lock out/Tag out (LOTO) requirements for die-setting operations in hydraulic power presses. - 04/22/2005
- 1910.212(a)(3)(ii) - Oil Rig Inspection. - 12/15/1980
- 1910.212(a)(3)(ii) - OSHA enforcement policy on vertical food mixers. - 02/26/1999
- 1910.212(a)(3)(ii) - Power Press Brakes. - 04/20/1986
- 1910.212(a)(3)(ii) - Presence Sensing Palm Button Devices (PSPBD). - 08/05/1992
- 1910.212(a)(3)(ii) - The feasibility of OSHA's machine guarding requirements in their workplace. - 08/03/1989
- 1910.212(a)(3)(ii) - The safe use of portable, compressed-air-actuated, fastener driving tools (staple guns) - 08/08/1986
- 1910.212(a)(3)(ii) - Use of Electro Sensitive Protection Equipment as point of operation guarding devices. - 06/05/2001
- 1910.212(a)(3)(iv) - Lockout/tagout requirements for servicing manually-controlled vertical/horizontal milling machine and drill press tool changes. - 08/24/2005
- 1910.212(a)(3)(iv)(e) - Trip and Emergency Switches on Mills and Calenders - 08/31/2021
- 1910.212(a)(3)(iv)(h) - Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools - 03/25/1985
- 1910.212(a)(3)(iv)(i) - Trip and Emergency Switches on Mills and Calenders - 08/31/2021
- 1910.212(a)(4) - Guarding of rotating barrels, containers, and drums. - 11/18/1981
- 1910.212(a)(5) - Maximum permissible guard openings for blade guards on cooling fans - 08/21/2003