1
10/15/2024
Inspection Guidance for Animal Slaughtering and Processing Establishments
2
05/08/2023
Guards for Belt and Shaft Drives on Blow Motors
3
06/10/2013
General requirements for all machines
4
08/22/2012
Speed-Sensing Machine Guards
5
05/08/2012
Guarding machines on moveable benches and pedestals
6
05/16/2008
Guarding and the use of abrasive wheels in CNC contouring machines.
7
12/28/2006
Application of the Lockout/Tagout standard to die-setting activities and other machine setup operations.
8
08/25/2006
Several questions regarding OSHA's LOTO and Bakery standards 29 CFR 1910.147 and 1910.263.
9
01/18/2006
Interlock requirements for access door(s) of trash compactor.
10
08/24/2005
Lockout/tagout requirements for servicing manually-controlled vertical/horizontal milling machine and drill press tool changes.
11
07/07/2005
Machine guarding and exposure to hazards from robotic laundry shuttles.
12
02/08/2005
Use of the European Norms and European Community machinery directive to comply with the 1910.212 "General [guarding] requirements for all machines."
13
02/11/2004
Use of laser guarding systems with hydraulic press brakes
14
08/21/2003
Maximum permissible guard openings for blade guards on cooling fans
15
05/13/2003
OSHA machine guarding standards and the ISO/IEC standards adopted under the GATT; National Emphasis Program on Amputations
16
11/15/1999
Guarding/hazards of using woodcutting sawblades on a cut-off machine
17
09/04/1996
Machine anchoring requirements as it may apply to the dental polishing lathes.
18
08/01/1996
Clarification of employers' use of floor fans.
19
03/29/1996
Machine Guarding Standard.
20
05/15/1995
The adequate guarding of a process pump.
21
12/20/1994
Machine-guarding requirements
22
09/20/1994
Standard 1910.212 in regards to its applicability to guard an area above the ram/piston on a vertical hydraulic downstroke/trash compactor.
23
09/17/1993
"Eyelet" and "four-slide" machines are covered by 1910.212.
24
06/14/1993
Applicability of the Machine Guarding and Lockout/Tagout standards to printing presses
25
04/20/1993
Machine guarding requirements as it applies to centrifuges.
26
04/14/1993
Interlock requirements for centrifuges.
27
11/19/1992
Compliance policy on unguarded rotary knives used in poultry processing industries
28
09/16/1992
Printing Presses: requirements for normal production and servicing operations
29
03/25/1992
Are Seybolt Cutter subject to machine guarding requirements.
30
01/08/1992
Whether or not guards are required for fan blades on an electrical transformer.
31
01/07/1992
Guarding of Unused portion of metal cutting bandsaws.
32
11/07/1991
Concerning power press brake operations.
33
09/12/1991
Machine guarding for the food processing industry.
34
05/01/1991
Calendar stacks used in the pulp and paper industry
35
09/07/1990
Feasibility of Guarding ESCO Swaging Presses.
36
07/10/1990
Radial saw guards and table saw guarding systems.
37
05/24/1990
Solid State Electronic AC Motor Brakes.
38
10/07/1987
Safeguarding of Metal Cutting Do-All Saw at the Norfolk Naval Shipyard.
39
08/08/1986
The safe use of portable, compressed-air-actuated, fastener driving tools (staple guns)
40
07/23/1986
Power Presses of the Powder Metal Industry.
41
05/27/1986
Safeguarding of power press brakes and a definition of "Safe Distance".
42
04/20/1986
Power Press Brakes.
43
09/25/1985
The use of Presense Sensing Device Initiation light curtains in regard to Mechanical Power Presses, Hydraulic Power Presses and Hydraulic Welding Presses.
44
07/12/1985
Standard applicable to paper and plastic shredder machines.
45
07/01/1985
Guarding requirements for package tying machines.
46
06/05/1985
Machine safeguarding requirements apply to refuse industry balers, compactors, and garbage trucks.
47
03/25/1985
Applicability of 1910.212(a)(3)(ii) to Portable Pneumatic Powered Fastener Tools
48
03/22/1984
Extent to which safety mats provide for compliance with OSHA regulations for machine guarding.
49
06/10/1983
The safeguarding of piece parts being worked on an outside diameter (O.D.) surface grinder.
50
03/18/1982
Public Law 91-596 pertains to workplace safety and health, and requires employers to provide employment free of recognized hazards and to comply with OSHA's regulations.
51
01/28/1982
Meat grinder standards.
52
06/24/1981
Guarding of Alligators Shears.
53
06/09/1981
Power press brakes.
54
05/19/1981
Machine anchoring requirements.
55
02/26/1981
Evaluation of the operating, Servicing, and Safety Instructions developed by Black Brothers Company, Inc.
56
02/13/1981
National Policy on Guarding Roving Frames
57
12/15/1980
Oil Rig Inspection.
58
09/23/1980
Power press brake used as a mechanical power press (punch press).
59
05/14/1979
Pneumatically operated staplers.
60
11/16/1978
The blade guard on the Biro All Purpose Cutter.
61
02/22/1978
Standards for mechanical power presses.
62
02/14/1978
Review of the safeguards provided on the Biro Meat Tenderizer and the Chopper (grinder) machines.
63
10/11/1977
The point of operation guarding on the Biro Power Meat Cutters (bandsaws).
64
07/01/1977
Point of Operation Guarding, As Applied To The Dvorak Model 314 Iron Worker.
65
03/21/1977
The point of operation hazard on power brakes.
66
12/13/1976
The guarding requirements for riveting machines.
67
11/10/1976
Displeasure with the procedures utilized by OSHA.
68
09/29/1976
Proposed modifications to the Biro All-Purpose Cutter.
69
09/15/1976
Clarification of 1910.212 and 1910.242 as applying to hand-type office paper cutters and sharp edged hand tools
70
05/20/1976
Sewing machine guards.
71
12/08/1975
Clarification of head room requirements for emergency doors and machine guarding.
72
07/17/1975
The applicability of the standards to mechanical goods presses.
73
07/14/1975
Garb-el Food Waste Disposal Unit.
