Standard Interpretations(Archived) - Standard Number

RSS Standard Interpretations Subscribe to our RSS Standard Interpretations feed.

• Publication Date
• Standard #

Standard Number > 1926 > 1926.550

• 1926.550 - A crane may pick and carry or walk loads in accordance with the crane manufacturer's specifications. - 10/20/1981
• 1926.550 - Alarm devices not effective protection for hoisted personnel. - 10/05/1988
• 1926.550 - Annual crane inspections must be conducted by a competent person; no requirement for the inspection to take place within the United States. - 10/31/2003
• 1926.550 - Anti-two blocking devices on cranes. - 07/20/1990
• 1926.550 - Applicability of the steel erection standard to pre-cast concrete erection work; pre-planning of hoisting routes and procedures. - 10/29/2002
• 1926.550 - Applicable construction standards to hydraulic cranes and derricks. - 05/23/2001
• 1926.550 - Barge based cranes and 1926.550(g). - 05/11/1989
• 1926.550 - Barricading Swing Radius of Backhoes. - 06/13/1977
• 1926.550 - Barrier device for attachment to mobile equipment. - 03/27/1997
• 1926.550 - Batam crawler C-350 and C-35 machines used only as a tamper. - 03/11/1986
• 1926.550 - Booms in which lowering is controlled by a brake is prohibited without aid from other devices which slow the lowering speeds. - 11/29/1988
• 1926.550 - Cable Type Jib Stops. - 04/29/1980
• 1926.550 - Cardiovascular Stress and the use of Crane or Derrick Suspended Personnel Platforms - 02/18/1992
• 1926.550 - Christmas Treeing, Steel Erection. - 03/16/1988
• 1926.550 - Clarification of OSHA Instruction STD 11-11.2B as it pertains to the lifting of personnel with a jib crane. - 01/11/1985
• 1926.550 - Compliance determinations for locking hooks. - 10/04/1991
• 1926.550 - Construction crane certifications. - 08/18/1981
• 1926.550 - Controlled load lowering and prohibition of the use of cranes with live booms. - 08/14/1989
• 1926.550 - Corrections to general industry standards incorporated into the construction standards. - 08/21/1996
• 1926.550 - Cranes and personnel hoists. - 10/04/1989
• 1926.550 - Fall protection for steel erection and the requirements for lifting tandem loads. - 06/06/1994
• 1926.550 - Girder Lock Overhang Form System. - 04/19/1994
• 1926.550 - Hoisting of workmen by load lines of cranes. - 12/13/1978
• 1926.550 - Hooks on overhaul ball assemblies shall be of a type that can be closed and locked. - 01/27/1988
• 1926.550 - Hydraulic Truck Cranes. - 06/28/1984
• 1926.550 - In 1973 and 1988, rules were developed by ANSI to address hydraulic boom cranes. - 06/09/1992
• 1926.550 - Inspections of derricks and cranes - 04/15/1992
• 1926.550 - Instruction does not alter a standard. - 12/13/1974
• 1926.550 - Interpretation of riding the load or hook. - 07/07/1976
• 1926.550 - Interpretation of the term "close hook". - 12/02/1983
• 1926.550 - Load Chart Posting and Visibility Requirements for Mobile Cranes - 11/05/1991
• 1926.550 - Man-lift standards and interpretations. - 12/22/1976
• 1926.550 - Modified approach to lifting several steal beams at one time. - 12/06/1991
• 1926.550 - Operating a crane in close proximity to overhead power lines. - 12/03/1991
• 1926.550 - Operation of cranes near powerlines. - 03/20/1996
• 1926.550 - Physical qualification requirements for crane operators. - 08/31/1978
• 1926.550 - Physical Qualifications of Crane Operators. - 04/13/1981
• 1926.550 - Point of instability of a crane. - 09/07/1984
• 1926.550 - Positive acting anti-two-block device. - 04/11/1989
• 1926.550 - PPM crane repairs. - 01/18/1995
• 1926.550 - Prelift plans. - 01/31/1984
• 1926.550 - Requirements of using cranes to hoist personnel. - 09/21/2001
• 1926.550 - Structural steel connector used to tie off. - 09/28/1976
• 1926.550 - The use of a crane near overhead power lines. - 11/01/1993
• 1926.550 - The use of crane or derrick suspended personnel platforms (CDSPP) during stack and chimney erection. - 09/05/1995
• 1926.550 - Use of crane-handled personnel cages. - 05/24/1983
• 1926.550 - Use of cranes having replacement parts - 04/15/1992
• 1926.550 - Whether §1926.550(g) applies to boom-attached personnel lifting platforms and, if not, whether OSHA requires proof testing of such platforms; what is the meaning of "at each new job site" in ASME B30.23; and what standards apply to derrick mounted bu - 01/12/2007
• 1926.550 - Work Platforms suspended from Lattice or Hydraulic Crane Booms. - 10/28/1987

NOTICE: This is an OSHA Archive Document, and no longer represents OSHA Policy. It is presented here as historical content, for research and review purposes only. Return to current Interpretations.