Scheduled Maintenance - President's Day Weekend
The U.S. Department of Labor will be conducting scheduled system maintenance beginning Friday, Feb. 15 at 5 p.m. ET through Tuesday, Feb. 19 at 8 a.m. ET. Some pages may be temporarily unavailable. To report an emergency, file a complaint with OSHA, or to ask a safety and health question, call 1-800-321-6742 (OSHA).

eTools Home : Machine Guarding Scope | Standards | Bibliography | Credits
Machine Guarding
Thermoforming Machines»
Use the "Move Left" and "Move Right" links below to navigate around the machine.  Featured areas in the image are numbered and described in the "Featured Areas" section located below the image.

Thermoforming Machine Safety Tour - Slide 8
 
Featured Areas
(1) Outgoing nip roller on feed end. [Photo description: Highlighted area includes back view of nip roller with plastic material hanging down as it feeds into the sheet intake area.] View close-up
(2) These are the air and electric lines. [Photo description: Highlighted area includes air and electric lines that run along the floor between the nip roller area and the sheet intake area.] View close-up
Accessibility Assistance: Contact the OSHA Directorate of Technical Support and Emergency Management at (202) 693-2300 for assistance accessing OSHA graphics.
eTools Home : Machine Guarding Scope | Standards | Bibliography | Credits