Use the "Move Left" and "Move Right" links below
to navigate around the machine. Featured areas in the image are numbered and
described in the "Featured Areas" section located below the image.
Signs are posted on a machine to inform employees of
danger points. Warning signs may be used in conjunction with signs that give specific
information about the hazards involved, training required, or specific job duties
that they pertain to. A red sign indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury. This sign warns workers that
lockout/tagout must be used when performing servicing and maintenance to prevent
injuries from hazardous energy. [Photo description:
Highlighted area includes a red warning sign with the following text: Warning.
Lock-out all machinery prior to servicing. Failure to comply will result in
disciplinary action.] View close-up
||This is the liquid crystal display (LCD)
screen that allows the operator to control the operation of this thermoforming
machine. [Photo description:
Highlighted area includes a color monitor screen and keypad suspended by a hanging
arm about a foot away from the side of the machine.] View close-up
Accessibility Assistance: Contact the OSHA Directorate of Technical Support and Emergency Management at (202) 693-2300 for assistance accessing OSHA graphics.