Use the "Move Left" and "Move Right" links below
to navigate around the machine. Featured areas in the image are numbered and
described in the "Featured Areas" section located below the image.
| Featured Areas |
| (1) |
This is the air pressure
regulator for controlling the different cylinders. [Photo description: Highlighted area includes a long narrow control surface on the
side of the machine with knobs and gauges running vertically down the front.] View close-up |
| (2) |
Signs are posted on a machine to inform us of
danger points. Warning signs may be used in conjuction with signs that give specific
information about the hazards involved, training required, or specific job duties
that they pertain to. A red sign indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury. This sign warns workers that
lockout/tagout must be used when performing servicing and maintenance to prevent
injuries from hazardous energy. [Photo description:
Highlighted area includes a red warning sign with the following text: Warning.
Lock-out all machinery prior to servicing. Failure to comply will result in
disciplinary action.] View close-up |
Accessibility Assistance: Contact the OSHA Directorate of Technical Support and Emergency Management at (202) 693-2300 for assistance accessing OSHA graphics.
|
Newsletter
RSS Feeds
