eTools Home : Machine Guarding Scope | Standards | Bibliography | Credits
Machine Guarding
Thermoforming Machines»

Use the "Move Left" and "Move Right" links below to navigate around the machine.  Featured areas in the image are numbered and described in the "Featured Areas" section located below the image.

Thermoforming Machine Safety Tour - Slide 13
 
Featured Areas
(1) This is the air pressure regulator for controlling the different cylinders. [Photo description: Highlighted area includes a long narrow control surface on the side of the machine with knobs and gauges running vertically down the front.] View close-up
(2) Signs are posted on a machine to inform us of danger points. Warning signs may be used in conjuction with signs that give specific information about the hazards involved, training required, or specific job duties that they pertain to. A red sign indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This sign warns workers that lockout/tagout must be used when performing servicing and maintenance to prevent injuries from hazardous energy. [Photo description: Highlighted area includes a red warning sign with the following text: Warning. Lock-out all machinery prior to servicing. Failure to comply will result in disciplinary action.] View close-up

Accessibility Assistance: Contact the OSHA Directorate of Technical Support and Emergency Management at (202) 693-2300 for assistance accessing OSHA graphics.

eTools Home : Machine Guarding Scope | Standards | Bibliography | Credits