TranslateStandard Interpretations
RSS Standard Interpretations Subscribe to our RSS Standard Interpretations feed.
Standard Interpretations are letters or memos written in response to public inquiries or field office inquiries regarding how some aspect of or terminology in an OSHA standard or regulation is to be interpreted and enforced by the Agency. These letters provide guidance to clarify the application of an established OSHA standard, policy, or procedure, but they may not, in themselves, establish or revise OSHA policy or procedure or interpret the OSH Act. They must specifically cite the source policy or procedure document they interpret.
- 1910.252 - Clarification of OSHA's position on FR Clothing for welders. - 01/12/2012
- 1910.252 - Conflict between requirements of 1910.252 and 1910.146. - 07/30/1993
- 1910.252 - Interpretation of Standards. - 09/05/1990
- 1910.252 - Introduction of electrical welding equipment into a non-permit confined space. - 05/12/1997
- 1910.252 - Permit-required confined spaces and control of hazardous energy; vehicle LOTO. - 01/11/1996
- 1910.252 - Spray painting relating to vehicle maintenance operations. - 07/28/1992
- 1910.252 - The Hornell Elektrooptick welding helmet appears to meet the intent of the OSHA standards. - 12/12/1984
- 1910.252 - Transparent Welding Curtains and the Requirements. - 03/17/1978
- 1910.252 - Valve protection for compressed gas cylinders. - 10/22/1980
- 1910.252 - Welder electrical safety training. - 03/12/1998
- 1910.252 - Wodelic Electronic Welding Helmet - 03/28/1986
- 1910.252(a)(2)(xiii)(C) - Training and competency for oxygen-fuel gas welding equipment use. - 05/13/1998
- 1910.252(a)(4)(i) - Introduction of electrical welding equipment into a non-permit confined space. - 05/12/1997
- 1910.252(b)(2) - Evaluation of Bilsom "VISION" welding helmet in meeting OSHA standards. - 06/20/1986
- 1910.252(b)(2)(ii) - Cool-view welding helmets must meet Grade D breathing air requirements; Requirements for standard welding helmets. - 07/14/1981
- 1910.252(b)(2)(ii)(I) - Evaluation of Bilsom "VISION" welding helmet in meeting OSHA standards. - 06/20/1986
- 1910.252(b)(3) - Clarification of OSHA's position on FR Clothing for welders. - 01/12/2012
- 1910.252(b)(4)(i) - Introduction of electrical welding equipment into a non-permit confined space. - 05/12/1997
- 1910.252(b)(4)(vii) - Introduction of electrical welding equipment into a non-permit confined space. - 05/12/1997
- 1910.252(c) - Correct placement of air sampling cassettes on employees performing welding operations. - 02/03/1999
- 1910.252(c) - Enforcement of ventilation requirements for welding operations. - 08/27/1993
- 1910.252(c) - Sampling for lead welding fumes. - 03/22/1995
- 1910.252(c)(10) - Introduction of electrical welding equipment into a non-permit confined space. - 05/12/1997
- 1910.252(c)(4) - Introduction of electrical welding equipment into a non-permit confined space. - 05/12/1997
- 1910.252(c)(9) - Introduction of electrical welding equipment into a non-permit confined space. - 05/12/1997