U.S. Department of Labor
Frances Perkins Building
200 Constitution Avenue, N.W.
Washington, DC 20210
The meeting of the Advisory Committee on Construction Safety and Health (ACCSH) was called to order by Chairman Erich J. (Pete) Stafford, at 1 p.m., Thursday, December 5, 2013. The following members and OSHA staff were present (* mark members who participated via WebEx conferencing):
|NAME||SECTOR REPRESENTED||TITLE & ORGANIZATION|
|Kristi Barber *||Employer Representative||President, GBA Construction, Inc., Glenn C. Barber & Associates, Inc|
|Jeremy Bethancourt *||Public Representative||Co-Owner and Program Director, Arizona Construction Training Alliance|
|Kevin R. Cannon||Employer Representative||Director of Safety and Health Services, The Associated General Contractors of America|
|Sarah Coyne||Employee Representative||Executive Assistant Director, International Union of Painters and Allied Trades/Finishing Trades Institute|
|Roger Erickson *||Employee Representative||MOST Administrator, Mobilization Optimization Stabilization and Training, International Brotherhood of Boilermakers, Iron Ship Builders, Blacksmiths, Forgers & Helpers, AFL-CIO|
|Matt Gillen||Federal Representative||Deputy Director, NIOSH Office of Construction Safety and Health and Coordinator, NORA Construction Sector|
|Steve Hawkins *||State Representative||Administrator, Tennessee Occupational Safety and Health Administration|
|Walter Jones||Employee Representative||Associate Director, Occupational Safety & Health, Laborers' Health and Safety Fund|
|Thomas Marrero, Jr.||Employer Representative||National Safety Director, Tradesmen International, Inc.|
|Jerry Rivera||Employer Representative||Regional Safety Director, Power Design Inc.|
|Donald L. Pratt||Employer Representative||President & CEO, Construction Education and Consulting Services of Michigan|
|Laurie A. Shadrick||Employee Representative||Training Specialist, United Association of Plumbers and Pipefitters|
|Erich J. (Pete) Stafford||Employee Representative||Director of Safety and Health, Building and Construction Trades Department of the AFL-CIO; Executive Director, CPWR-The Center for Construction Research and Training|
|Charles Stribling||State Representative||OSH Federal-State Coordinator, Kentucky Labor Cabinet, Department of Workplace Standards|
|Lisa A. Wilson||ACCSH Counsel||Office of the Solicitor, U.S. Dept. of Labor|
|Dean McKenzie||Designated Federal Official||Acting Deputy Director, Directorate of Construction, DOL OSHA|
Thursday, December 5, 2013
Chairman Stafford welcomed the attendees and provided an overview of the meeting agenda. Chairman Stafford informed the audience that if they wanted to address the committee, they must sign up to be recognized during the public comment period at the conclusion of each day.
Deputy Assistant Secretary for Occupational Safety and Health - Mr. Jordan Barab:
Mr. Barab began by welcoming the ACCSH members and all who were in attendance. He informed them that the Agency had been particularly busy over the last several months in terms of regulatory activities, general outreach activities, and enforcement activities.
Silica: The silica proposal is at the forefront of our regulatory activities. The notice of proposed rulemaking (NPRM), which was issued on September 12th, is basically an update to a 40 year old standard that has a 40 year old permissible exposure limit (PEL). This update will bring the industry into the 21st century. Not only does silica exposure cause silicosis, cancer, Chronic Obstructive Pulmonary Disease (COPD) and other diseases, but the exposure occurs at a much lower level than those currently established. This update is well overdue
Recordkeeping: Another rule that we've just proposed is what we are colloquially calling "recordkeeping modernization". Basically, we will improve injury and illness tracking by collecting the injury and illness logs from employers who are already required to complete them. One of the advantages is that employers will be able to benchmark themselves against other employers in the same industry. Workers will also be able to compare their employers with other employers and we are hoping this will encourage employers to improve their health and safety performance. Aside from the physical action of sending the information into OSHA, there are no additional requirements put on employers.
Process Safety Management: We also issued a Request for Information (RFI) on modernizing our Process Safety Management (PSM) standard. This was a result of the Executive Order (E.O.) the President issued following the ammonium nitrate disaster in West Texas. This E.O., which also goes into a number of security issues and environmental issues that are under the purview of EPA and Department of Homeland Security, will result in improved safety and security in our chemical installations across the country.
Mr. Barab provided an update on the temporary worker initiative. The health and safety of temporary workers is probably one of the most important initiatives we've addressed recently. Our basic aim is to make sure that there are no gaps left in the training and protection of these workers. Every worker in the United States, whether they're a permanent or a staffing agency employee, deserves a safe workplace. We are looking mainly at staffing agencies that provide workers to other employers. We have been working with the American Staffing Association very closely to make sure this message gets out to their members.
Mr. Barab briefed the committee on the recent building collapse in Philadelphia. The building was being demolished when a wall without sufficient lateral support collapsed, killing 6 people and injuring 14 others
The owners of the companies involved were cited with three willful, egregious violations for each day the wall stood without sufficient lateral support; and two willful violations alleging the failures to demolish the building from the top down and for not having an engineering survey by a competent person prior to starting the demolition.
Finally, Mr. Barab acknowledged that ACCSH member Mr. Matt Gillen was retiring and wished him well.
For a full account of Mr. Barab's presentation, refer to page 12 (Line 11) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Discussion of the two hour Introduction to the OSHA 10-Hour and 30-Hour Training Courses
Mr. Kevin Cannon, Mr. Roger Erickson and Mr. Jerry Rivera, Training and Outreach Workgroup Co-Chairs
The Co-Chairs provided a slide by slide presentation of their recommended changes to reduce the current Introduction to OSHA module to eliminate the mandatory 2- hour time requirement. They led the committee through a robust discussion and provided their rationale for each of their proposed changes. The workgroup recommendations included combining several of the existing slides; relocating some slides to other existing modules in the program; and the elimination of some of the group exercises. The committee as a whole was receptive of their overall recommendations.
For a full account of the Training and Outreach Workgroup presentation, refer to page 35 (Line 1) of the December 5, 2013 meeting transcript in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Frank Trujillo, Miller and Long Concrete and Construction
Mr. Trujillo shared his support of the Training and Outreach discussion of the two hour Introduction to the OSHA 10-Hour and 30-Hour Training Courses presentation.
For a full account of Mr. Trujillo's comments refer to page 125 (Line 19) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Rod Weber, PENTA Building Group
Mr. Weber comments were in regards to the Training and Outreach discussion of the two hour Introduction to the OSHA 10-Hour and 30-Hour Training Courses presentation. Mr. Weber said he supported eliminating all of the discussion questions because there is a quiz for general knowledge retention at the end of the module. He felt this would free up quite a bit of time.
For a full account of Mr. Weber’s comments refer, to page 129 (Line 19) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Tom Trauger, Winchester Homes
Mr. Trauger also commented on the Training and Outreach discussion of the two hour Introduction to the OSHA 10-Hour and 30-Hour Training Courses presentation. Mr. Trauger said he wanted OSHA to ensure the student handout, instructor's guideline and procedures online all line-up with the recommended changes.
For a full account of Mr. Trauger's comments refer, to page 136 (Line 7) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Wayne Creasap, Association of Union Contractors
Mr. Creasap commended the Training and Outreach workgroup on their two hour Introduction to the OSHA 10-Hour and 30-Hour Training Courses presentation. Mr. Creasap asked the group to ensure they apply their recommendations for the 10 and 30 hour courses appropriately. The 30 hour is perceived more so as a course for supervisors while the 10-hour is seen as a course for workers.
For a full account of Mr. Creasap’s comments refer, to page 137 (Line 19) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Matthew Eckstine, National Commission for the Certification of Crane Operators (NCCCO)
Mr. Eckstine asked the committee for an update on the proposed crane operator certification extension. He was informed that Mr. Maddux will be addressing that topic during his presentation on December 6, 2013.
For a full account of Mr. Eckstine’s comments refer, to page 141 (Line 20) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Ms. Anna Fendley, United Steelworkers
Ms. Fendley briefed the committee that her organization eagerly awaits the release of OSHA proposed rule on beryllium. She encouraged ACCSH and OSHA to do whatever it can to complete this as quickly as possible
For a full account of Ms. Fendley’s comments refer, to page 144 (Line 8) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Steve Rank, Ironworkers International Union
Mr. Rank asked the committee for their continued support to pursue the reinforced concrete standard that's currently on OSHA's regulatory agenda.
For a full account of Mr. Rank’s comments refer, to page 149 (Line 10) of the December 5, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
The meeting was adjourned for the day at 3:58 p.m.
Friday, December 6, 2013
Chairman Stafford reconvened the ACCSH meeting at 1 p.m., Friday, December 6, 2013.
Assistant Secretary for Occupational Safety and Health - Dr. David Michaels:
Dr. Michaels made a brief visit to the meeting to acknowledge ACCSH member Mr. Matt Gillen’s pending retirement. Dr. Michaels thanked Mr. Gillen for the many contributions he had made to the committee and to OSHA over the years and presented him a Certificate of Appreciation.
Directorate of Construction Update – Mr. Jim Maddux, Director
Mr. Maddux began his presentation by revisiting the Training and Outreach Workgroup two hour Introduction to the OSHA 10-Hour and 30-Hour Training Courses presentation. He congratulated the committee for really engaging on this issue. Mr. Maddux noted that nearly 700,000 workers took these courses last year making it an amazing opportunity to pass-on valuable information they would probably never get in that kind of detail in any other place. Mr. Maddux thanked the committee for a job well done.
Mr. Maddux provided the committee an update on the following Directorate of Construction areas of interest.
Web Page Updates: Mr. Maddux briefed the committee that DOC has begun posting work group meeting minutes on the ACCSH website. We will continue to work our way back and eventually have them all posted. We’ve also launched a new webpage on construction incidents investigated by DOC’s Office of Engineering Services (OES). We now have 40 engineering reports that are posted on that site.
ACCSH Meetings and Membership: Mr. Maddux thanked the committee for working through these troubled budget times that have made it impossible to have full face-to-face meetings. However, he noted that by using this WebEx technology, this is our fourth meeting this year. He noted that the terms of six positions on the committee will expire next year and we have asked the public for nominees to fill those positions. Mr. Maddux also welcomed Ms. Lisa Wilson, who replaced Ms. Sarah Shortall, as ACCSH Counsel to the committee. He also thanked Ms. Shortall for all the work she did on this committee for many, many years.
Construction Fatality Statistics: The preliminary BLS numbers showed an increase in the 2012 construction fatality numbers compared to 2011. Falls remained the leading cause of construction fatalities. Mr. Maddux briefed that there were 14 more fall fatalities in 2012 than in 2011. However, the construction recordable incident rate was downto 3.7 compared to 3.9 in 2011.
Fall Prevention Campaign: Mr. Maddux briefed that over the past two years the Fall Prevention Campaign generated over 500,000 views of the campaign webpage. It has also resulted in over 300,000 pieces of literature being distributed. OSHA Regional and Area Offices have conducted nearly 3,000 outreach activities and the On-site Consultation Projects have conducted nearly 6,000 visits related to fall protection in construction.
Last year a few of our Regions did "safety stand downs" for fall protection where they asked employers to shut down and just talk about fall protection. Over 2,000 employers and over 50,000 workers participated in those stand downs. Next year, as part of the Fall Prevention Campaign, we are planning a National Fall Prevention Stand Down to get the whole nation talking about fall prevention.
For a full account of Mr. Maddux’s DOC Regulatory Update, refer to page 13 (Line 17) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Directorate of Standards and Guidance Update on the Globally Harmonized System of Classification and Labeling of Chemicals (GHS) Program Ms. Deana Holmes, Directorate of Standards and Guidance
Ms. Holmes provided the committee with a detailed overview of the GHS program. She highlighted two very important dates rolled out in GHS. The first was December 1st, 2013, when all employees had to be trained on the new label and safety data sheet formats. This training must ensure that workers understand and can access and use the information effectively, and also understand that regardless who supplies the chemical, all the hazards will be communicated in the same exact way. The second date is June 1st, 2015, when all provisions of the standard have to be complied with. This includes all the labels and safety data sheets shipped after that date being in the new format.
For a full account of Ms. Holmes' GHS Update, refer to page 40 (Line 21) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Directorate of Standards and Guidance Presentation on Nanotechnology and Construction Ms. Janet Carter, Directorate of Standards and Guidance
Ms. Carter provided the committee an overview of applications where nanotechnology is being used in construction. Carbon nanotubes are used in roofing material, concrete reinforcement and textiles. Ms. Carter said because the Agency knows there are some health implications, we have been heavily involved in the National Nanotechnology Initiative with NIOSH, and we are involved in the Nanotechnology Environmental Health Implications work group.
For a full account of Ms. Carter's Nanotechnology Update, refer to page 59 (Line 7) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Presentation on the Draft Proposed Standard on Occupational Exposure to Beryllium Ms. Tiffany DeFoe and Mr. Bill Perry, Directorate of Standards and Guidance Ms. Louise Betz, Office of the Solicitor
Ms. Defoe briefed that the proposal for the new beryllium standard is moving along pretty quickly and the Agency is in the final stages of preparing a Notice of Proposed Rulemaking to send to OMB for review. The main operation in construction where beryllium is an issue for workers is in abrasive blasting. It is a contaminant in some blasting media, primarily coal slags, like Black Beauty and copper slags. In revising the current beryllium standard, the main concern has been to reduce worker's risk of chronic beryllium disease and lung cancer.
For a full account of Ms. DeFoe, Mr. Perry and Ms. Betz’s Beryllium presentation, refer to page 86 (Line 18) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Chairman Remarks/Public Comments
Mr. Matt Gillen, ACCSH Member, National Institute for Occupational Safety and Health (NIOSH)
Mr. Gillen, challenged his fellow committee member to think about the awesome responsibility for leadership that comes with being a member of ACCSH. He encouraged the committee to continue their efforts to get the General Services Administration to prequalify contractors for safety and health on federal construction contract. He also suggested that OSHA and ACCSH consider establishing a Focus Four for Health related incidents.
For a full account of Mr. Gillen's presentation, refer to page 100 (Line 22) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Pete Stafford, Chairman:
Chairman Stafford led the committee through a comprehensive review of the current workgroups. It was decided after the discussion that the chairman would meet with the OSHA staff to consider the recommendations offered to help make the committee and workgroup more efficient.
For a full account of Mr. Stafford’s Workgroup discussion, refer to page 100 (Line 22) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Paul Mellon, Novetas Solutions
Mr. Mellon shared with the committee that a lot of the beryllium health issues could be solved very easily if you were to substitute products. He went on to share that there are abrasives in the industry that do not lead to chronic beryllium disease or lung cancer.
For a full account of Mr. Mellon's discussion, refer to page 148 (Line 11) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
Mr. Keith Wrightson, Worker Safety and Health Advocate at Public Citizen
Mr. Wrightson informed the committee that Public Citizen has been involved with the beryllium standard or the proposed standard for many, many years. Public Citizen highly encourages OSHA to consider a PEL of .2 rather the .5 that is currently in the proposal.
For a full account of Mr. Wrightson's discussion, refer to page 162 (Line 6) of the December 6, 2013 meeting transcript, in Docket - OSHA-2013-0006 at http://www.regulations.gov.
The meeting was adjourned for the day at 4 p.m.
*Accessibility Assistance: Contact OSHA's Directorate of Construction at (202) 693-2020 for assistance accessing PDF materials.
All other documents, that are not PDF materials or formatted for the web, are available as Microsoft Office® formats and videos and are noted accordingly. If additional assistance is needed with reading, reviewing or accessing these documents or any figures and illustrations, please also contact OSHA's Directorate of Construction at (202) 693-2020.
**eBooks - EPUB is the most common format for e-Books. If you use a Sony Reader, a Nook, or an iPad you can download the EPUB file format. If you use a Kindle, you can download the MOBI file format.Back to Top
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.