DISCLAIMER: The expert advisor referenced on this page was designed several years ago and although it should function using the latest versions of Windows without problem, there may be instances where it is no longer compatible (i.e., Windows 64-bit).
OSHA conducts inspections of hazardous waste site activities. During these inspections, deficiencies in written Health and Safety Plans (HASP) are commonly found. These deficiencies generally indicate a lack of knowledge and/or understanding of the required content of the HASP. The most consistent deficiency is a lack of site-specificity in the plans.
In the early 1990s, EPA's Environmental Response Team published a DOS-based software package which generated a model HASP. It contained some automatic fill options and simple decision logic, but was limited in its programmed features and in its capacity to generate a site-specific HASP. Based on field evidence, both Agencies became interested in updating the original EPA software. As a result, the original e-HASP Program (Version 1) using Windows-based software was developed and completed in September, 2003. Since then, numerous comments were received to improve the functionality and "user friendliness" of the software.
The updated e-HASP2 (Version 2) Program continues to use Windows-based software and includes decision logic to assist the user in determining the appropriate controls for health and safety hazards on their sites. The integrated chemical database has been improved with more chemicals and updated exposure limits. Some of the other notable upgrades for e-HASP2 include: 1) upgrades to pick-lists, 2) function to add new chemicals that are not in the chemical database, 3) function to export reports to a word processor for editing, 4) new "preview chapter" button, and 5) a newly designed job hazard analysis (JHA) chapter.
e-HASP2 is an electronic and interactive program that is intended to be used by health and safety professionals to provide "model" language that is acceptable to OSHA in preparing a site's HASP. These same professionals can also draw on the chemical database and embedded decision logic to assist them in identifying the hazards associated with site-specific contaminants and in choosing effective site controls for worker protection.
The e-HASP2 software includes fifteen chapters and these are listed below.
The user manual is posted as a PDF document. Expected download time over a 56 kilo-baud per second (Kbps) modem is approximately 2 minutes.
To install the E-HASP2 Software, the following minimum system requirements and installation requirements should be followed.
You must complete all three steps before attempting to run the eHASP2 software. Failure to complete Step 2 will result in the application opening as a "read-only" file and you will not be able to save your data.
MINIMUM SYSTEM REQUIREMENTS:
OSHA invites the public to download, use, and comment on this e-HASP2 software. OSHA has incorporated many good suggestions from commenters who reviewed other OSHA software.
If you have suggestions, comments or need user support on this software, please submit them to: firstname.lastname@example.org. If you have safety or health problems in your workplace, you should contact your local OSHA office.
e-HASP2 was developed by OSHA's DEP/OHE, in coordination with the EPA. E-HASP2 is programmed in Microsoft® Access using Visual Basic coding.
* Accessibility Assistance: Contact OSHA's Directorate of Enforcement Programs at (202) 693-2129 for assistance accessing PDF, ZIP and MDB materials.
The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.