eTools Home : Machine Guarding Scope | Standards | Bibliography | Credits
Machine Guarding
Thermoforming Machines»

Use the "Move Left" and "Move Right" links below to navigate around the machine.  Featured areas in the image are numbered and described in the "Featured Areas" section located below the image.

Thermoforming Machine Safety Tour - Slide 11
 
Featured Areas
(1) The two water lines on the left provide process water to the thermoformer. The line on the right (with the yellow handle) is a compressed air line with a lockable/bleed off valve for use during lockout of the line. [Photo description: Highlighted area includes several metal pipes on the side of the main machine body. One of the pipes has a yellow handle.] View close-up
(2) Behind this door is the servo controller. [Photo description: Highlighted area includes a white metal door on the side of the machine. The door is nearly the entire height of the machine.] View close-up

Accessibility Assistance: Contact the OSHA Directorate of Technical Support and Emergency Management at (202) 693-2300 for assistance accessing OSHA graphics.

eTools Home : Machine Guarding Scope | Standards | Bibliography | Credits