US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Back to Safety and Health Topics Page

Consensus Standards

These standards are NOT OSHA regulations. However, they do provide guidance from their originating organizations related to worker protection. In some cases, they may be mandated by State or local governments, or individual companies.

National Fire Prevention Association (NFPA)

NFPA develops, publishes, and disseminates more than 300 consensus codes and standards intended to minimize the occurrence and effects of fire and other risks. Virtually every building, process, service, design, and installation in society today is affected by NFPA documents. These standards may be viewed online at NFPA Codes and Standards. Those related directly to combustible dust explosion hazards are:

  • 61, Standard for the Prevention of Fires and Dust Explosions in Agricultural and Food Processing Facilities
  • 484, Standard for Combustible Metals
  • 654, Standard for the Prevention of Fires and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids
  • 655, Standard for Prevention of Sulfur Fires and Explosions
  • 664, Standard for the Prevention of Fires and Explosions in Wood Processing and Woodworking Facilities

FM Global

These Standards address aspects of combustible dust hazards:

  • Property Loss Prevention Data Sheet 7-73, Dust Collectors and Collection Systems
  • Property Loss Prevention Data Sheet 7-76, Prevention and mitigation of Combustible Dust Explosion and Fire

International Code Council (ICC)

These Standards address aspects of combustible dust hazards:

  • International Building Code
  • International Fire Code
  • International Mechanical Code

Consensus Standards and the General Duty Clause

The General Duty Clause, Section 5(a)(1) of the OSH Act, can be used to cite employers that fail to keep a workplace free of hazards, but only where there is no OSHA standard that applies to the particular hazard involved. In evaluating such situations, the hazard must be recognized (by industry or the employer), must have caused or be likely to cause death or serious physical harm, and a feasible means to correct the hazard must be available. Consensus standards  may be used to provide a feasible means of abatement and establish employer and industry knowledge.

Section 5(a)(1) is not:

  • used to enforce "should" standards.
  • used to require abatement methods not required by a specific standard.
  • normally used to cover categories of hazards exempted by an OSHA standard.

*Accessibility Assistance: Contact OSHA's Directorate of Standards and Guidance at (202) 693-1999 for assistance accessing PDF materials.

All other documents, that are not PDF materials or formatted for the web, are available as Microsoft Office® formats and videos and are noted accordingly. If additional assistance is needed with reading, reviewing or accessing these documents or any figures and illustrations, please also contact OSHA's Directorate of Standards and Guidance at (202) 693-1999.

**eBooks - EPUB is the most common format for e-Books. If you use a Sony Reader, a Nook, or an iPad you can download the EPUB file format. If you use a Kindle, you can download the MOBI file format.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close