Inspection Detail
Note: The following inspection has not been indicated as closed. Please be aware that the information shown may change, e.g. violations may be added or deleted. For open cases, in which a citation has been issued, the citation information may not be available for 5 days following receipt by the employer for Federal inspections or for 30 days following receipt by the employer for State inspections.
Inspection: 1643112.015 - Compton'S Precision Machine & Tool Dba Eastern Enterprise
Inspection Information - Office: Cincinnati
Site Address:
Compton'S Precision Machine & Tool Dba Eastern Enterprise
224 Dayton Avenue
Springfield, OH 45506
Mailing Address:
224 Dayton Avenue, Springfield, OH 45506
Union Status: NonUnion
SIC:
NAICS: 332710/Machine Shops
Inspection Type: Fat/Cat
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 01/10/2023
Emphasis: N:Amputate, L:Piv
Case Closed:
Type | Activity Nr | Safety | Health |
---|---|---|---|
Accident | 1986362 |
Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
---|---|---|---|---|---|---|
Initial Violations | 5 | 5 | ||||
Current Violations | 5 | 5 | ||||
Initial Penalty | $40,625 | $0 | $0 | $0 | $0 | $40,625 |
Current Penalty | $20,000 | $0 | $0 | $0 | $0 | $20,000 |
FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
# | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
---|---|---|---|---|---|---|---|---|---|---|---|
1. | 01001 | Serious | 19100132 D01 | 05/18/2023 | 06/07/2023 | $2,500 | $6,250 | $0 | I - Informal Settlement | ||
2. | 01002 | Serious | 19100147 D | 05/18/2023 | 06/07/2023 | $2,500 | $6,250 | $0 | I - Informal Settlement | ||
3. | 01003 | Serious | 19100147 C06 I | 05/18/2023 | 06/07/2023 | $2,500 | $6,250 | $0 | I - Informal Settlement | ||
4. | 01004A | Serious | 19100132 F01 | 05/18/2023 | 06/07/2023 | $2,500 | $6,250 | $0 | I - Informal Settlement | ||
5. | 01004B | Serious | 19100147 C07 I A | 05/18/2023 | 06/07/2023 | $0 | $0 | $0 | I - Informal Settlement | ||
6. | 01004C | Serious | 19100147 C07 I B | 05/18/2023 | 06/07/2023 | $0 | $0 | $0 | I - Informal Settlement | ||
7. | 01005 | Serious | 19100212 A01 | 05/18/2023 | 06/07/2023 | $10,000 | $15,625 | $0 | I - Informal Settlement |
Investigation Summary
At 7:45 a.m. on January 1, 2023, an employee was operating a CNC machine with the L front access gate open. The machine did not have any interlocks or guarding, and no machine specific lockout/tagout procedures. The employer did not provide training on PPE, guarding, or lockout/tagout procedures. The employee was leaning above and over the machine's rotating spindle and was pulled into the lathe, causing multiple unspecified crush injuries. The employee was transported to a hospital and died a few hours later.
Keywords:crushed, crushing, guard, lathe, leaning over, lockout/tagout, machine operator, pulled in, training, unguarded
# | Inspection | Age | Sex | Degree | Nature | Occupation |
---|---|---|---|---|---|---|
1 | 1643112.015 | Fatality |