ACETYLSALICYLIC ACID
| CAS # | 50-78-2 |
|---|---|
| Formula |
C₉H₈O₄ |
| Synonyms |
acetal; o-acetoxybenzoic acid; 2-acetoxybenzoic acid; aspirin |
| Physical description | Odorless, colorless to white, crystal-line powder. | ||
|---|---|---|---|
| Boiling point | 284°F (decomposes) | Molecular weight | 180.2 |
| Freezing point/melting point | 275°F | Vapor pressure | 0 mmHg (approx) |
| Flash point | Vapor density | ||
| Specific gravity | 1.35 | Ionization potential | |
| Lower explosive limit (LEL) | Upper explosive limit (UEL) | ||
| NFPA health rating | NFPA fire rating | ||
| NFPA reactivity rating | NFPA special instruction | ||
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | |||
|---|---|---|---|
| Sampling group | |||
| Sampler/Sampling media | |||
| Sampling time* | |||
| Sampling volume (TWA)* | |||
| Sampling flow rate (TWA)* | |||
| Sampling volume (STEL/Peak/C)* | |||
| Sampling flow rate (STEL/Peak/C)* | |||
| Analytical method instruments | |||
| Method reference | |||
| Notes | |||
| Special requirements |
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media | |
|---|---|
| Bulk Method |
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA | REL-TWA |
5 mg/m³ |
TLV-TWA |
5 mg/m³ [1977] |
PEL-TWA |
5 mg/m³ |
|
| PEL-STEL | REL-STEL | TLV-STEL | PEL-STEL | ||||
| PEL-C | REL-C | TLV-C | PEL-C | ||||
| Skin notation |
NA |
Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
|
Notes:
Not established |
Notes: | Notes: | Notes: | ||||
| Health factors: See NIH-NLM PubChem. | IDLH | ||||||
| Carcinogenic classifications: Not listed | Notes: | ||||||
| AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3: | |||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Acetylsalicylic acid NIOSH: Pocket Guide to Chemical Hazards - Acetylsalicylic acid Literature References
|
Last Updated Date : 12/15/2020
CYANOGEN CHLORIDE
| CAS # | 506-77-4 |
|---|---|
| Formula |
CNCl |
| Synonyms |
chlorcyan; chlorine cyanide; chlorocyanide; chlorocyanogen; cyanogen chloride inhibited |
| Physical description | Colorless gas or liquid (below 55°F) with an irritating odor. | ||
|---|---|---|---|
| Boiling point | 55°F | Molecular weight | 61.5 |
| Freezing point/melting point | 20°F | Vapor pressure | 1010 mmHg |
| Flash point | Vapor density | 2.16 | |
| Specific gravity | 1.22 (liquid at 32°F) | Ionization potential | 12.49 eV |
| Lower explosive limit (LEL) | Upper explosive limit (UEL) | ||
| NFPA health rating | NFPA fire rating | ||
| NFPA reactivity rating | NFPA special instruction | ||
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | C146 |
|---|---|
| Sampling group | |
| Sampler/Sampling media | XAD-2 tube (450/225 mg) coated with 10% 2-(hydroxymethyl)piperidine [SKC 226-27] |
| Sampling time* | 120 min |
| Sampling volume (TWA)* | 24 L |
| Sampling flow rate (TWA)* | 0.2 L/min |
| Sampling volume (STEL/Peak/C)* | 3 L |
| Sampling flow rate (STEL/Peak/C)* | 0.2 L/min |
| Analytical method instruments | GC-NPD |
| Method reference | OSHA PV2193 (partially validated) |
| Notes | |
| Special requirements |
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media | |
|---|---|
| Bulk Method |
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA | REL-TWA | TLV-TWA | PEL-TWA | ||||
| PEL-STEL | REL-STEL | TLV-STEL | PEL-STEL | ||||
| PEL-C | REL-C |
0.3 ppm (0.6 mg/m³) |
TLV-C |
0.3 ppm [2013] |
PEL-C |
0.3 ppm (0.6 mg/m³) |
|
| Skin notation |
NA |
Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
|
Notes:
Not established |
Notes: | Notes: | Notes: | ||||
| Health factors: See NIH-NLM PubChem. | IDLH | ||||||
| Carcinogenic classifications: Not listed | Notes: | ||||||
|
AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3:
--/0.5 ppm/4 ppm |
|||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Cyanogen chloride, stabilized NIOSH: Pocket Guide to Chemical Hazards - Cyanogen chloride Literature References
|
Last Updated Date : 12/22/2020
BIS-(2-CHLOROETHYL)SULFIDE
| CAS # | 505-60-2 |
|---|---|
| Formula |
C₄H₈Cl₂S |
| Synonyms |
HD; 2-2-dichlorodiethyl-sulfide; mustard gas |
| Physical description | Clear amber-colored oily liquid, with a faint odor of mustard/garlic. | ||
|---|---|---|---|
| Boiling point | 419-423°F | Molecular weight | 159.08 |
| Freezing point/melting point | 55-57°F | Vapor pressure | 0.09 mmHg at 86°F |
| Flash point | 221°F | Vapor density | 5.4 |
| Specific gravity | 1.274 | Ionization potential | |
| Lower explosive limit (LEL) | Upper explosive limit (UEL) | ||
| NFPA health rating | NFPA fire rating | ||
| NFPA reactivity rating | NFPA special instruction | ||
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | |||
|---|---|---|---|
| Sampling group | |||
| Sampler/Sampling media | |||
| Sampling time* | |||
| Sampling volume (TWA)* | |||
| Sampling flow rate (TWA)* | |||
| Sampling volume (STEL/Peak/C)* | |||
| Sampling flow rate (STEL/Peak/C)* | |||
| Analytical method instruments | |||
| Method reference | |||
| Notes | |||
| Special requirements |
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media | |
|---|---|
| Bulk Method |
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA | REL-TWA | TLV-TWA | PEL-TWA | ||||
| PEL-STEL | REL-STEL | TLV-STEL | PEL-STEL | ||||
| PEL-C | REL-C | TLV-C | PEL-C | ||||
| Skin notation |
NA |
Skin notation |
NA |
Skin notation |
NA |
Skin notation |
NA |
|
Notes:
Not established |
Notes:
Not established |
Notes:
Not established |
Notes:
Not established |
||||
| Health factors: See NIH-NLM PubChem. | IDLH | ||||||
| Carcinogenic classifications: IARC-1,NTP-K | Notes: | ||||||
| AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3: | |||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Mustard gas NIOSH: Pocket Guide to Chemical Hazards - Mustard gas Literature References |
Last Updated Date : 12/17/2020
2-AMINOPYRIDINE†
| CAS # | 504-29-0 |
|---|---|
| Formula |
C₅H₆N₂ |
| Synonyms |
α-aminopyridine; α-pyridylamine |
| Physical description | White powder, leaflets, or crystals with a characteristic odor. | ||
|---|---|---|---|
| Boiling point | 411°F | Molecular weight | 94.1 |
| Freezing point/melting point | 137°F | Vapor pressure | 0.8 mmHg at 77°F |
| Flash point | 198°F | Vapor density | |
| Specific gravity | Ionization potential | 8.00 eV | |
| Lower explosive limit (LEL) | Upper explosive limit (UEL) | ||
| NFPA health rating | NFPA fire rating | ||
| NFPA reactivity rating | NFPA special instruction | ||
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | 0165 |
|---|---|
| Sampling group | |
| Sampler/Sampling media | 2 GFFs (37 mm) coated with sulfuric acid, in 3-piece cassette, separated by the ring section [SKC 225-9004] |
| Sampling time* | 240 min |
| Sampling volume (TWA)* | 240 L |
| Sampling flow rate (TWA)* | 1 L/min |
| Sampling volume (STEL/Peak/C)* | |
| Sampling flow rate (STEL/Peak/C)* | |
| Analytical method instruments | GC-NPD |
| Method reference | OSHA PV2143 (partially validated) |
| Notes | |
| Special requirements |
|
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media |
|
|---|---|
| Bulk Method |
|
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA |
0.5 ppm (2 mg/m³) |
REL-TWA |
0.5 ppm (2 mg/m³) |
TLV-TWA |
|
PEL-TWA |
|
| PEL-STEL |
|
REL-STEL |
|
TLV-STEL |
|
PEL-STEL |
|
| PEL-C |
|
REL-C |
|
TLV-C |
|
PEL-C |
|
| Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
| Notes: |
Notes:
|
Notes:
Visit the ACGIH TLV site for specific data |
Notes:
|
||||
| Health factors: See NIH-NLM PubChem. | IDLH |
5 ppm |
|||||
| Carcinogenic classifications: |
Notes:
|
||||||
|
AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3:
|
|||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - 2-Aminopyridine NIOSH: Pocket Guide to Chemical Hazards - 2-Aminopyridine Literature References
|
Last Updated Date : 03/28/2023
BENZO[A]PYRENE†
| CAS # | 50-32-8 |
|---|---|
| Formula |
C₂₀H₁₂ |
| Synonyms |
BaP, 1,2-benzpyrene; 3,4-BP; 3,4-benzo(a)pyrene; 4,5-benzpyrene; 6,7-benzopyrene; benzo(d,e,f)chrysene; B(a)P). Synonyms vary depending upon the specific compound (e.g., pyrene, phenanthrene, acridine, chrysene, anthracene) |
| Physical description | Odorless, silver-gray to black solid. | ||
|---|---|---|---|
| Boiling point | 5612°F | Molecular weight | 252.32 |
| Freezing point/melting point | 3497-3515°F | Vapor pressure | depends upon the specific compound |
| Flash point | Vapor density | 8.7 | |
| Specific gravity | >1 | Ionization potential | |
| Lower explosive limit (LEL) | Upper explosive limit (UEL) | 2719°F | |
| NFPA health rating | 0 | NFPA fire rating | 1 |
| NFPA reactivity rating | 0 | NFPA special instruction | |
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | 0726 |
|---|---|
| Sampling group | |
| Sampler/Sampling media | Coal Tar Pitch Volatiles (CTPV) Sampling Filters and Cassette [SLTC109] |
| Sampling time* | 480 min |
| Sampling volume (TWA)* | 960 L |
| Sampling flow rate (TWA)* | 2 L/min |
| Sampling volume (STEL/Peak/C)* | |
| Sampling flow rate (STEL/Peak/C)* | |
| Analytical method instruments | HPLC-UV |
| Method reference | OSHA 58 (fully validated) |
| Notes | OSHA 58 is validated in conjunction with Coal Tar Pitch Volatiles and Coke Oven Emissions. OSHA personnel can obtain pre-cleaned filters, vials, and teflon-lined caps from the SLTC. |
| Special requirements | These media are prepared by SLTC as needed and are not available for immediate shipment. Please allow time for SLTC to prepare these media prior to sampling. After sampling, filter must be transferred to a vial with a teflon-lined cap. Sample must be protected from direct sunlight. |
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media | |
|---|---|
| Bulk Method |
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA |
0.2 mg/m³ as Coal tar pitch volatiles (benzene soluble fraction) |
REL-TWA |
0.1 mg/m³ as Coal tar pitch volatiles (cyclohexane extractable fraction) |
TLV-TWA | PEL-TWA |
0.2 mg/m³ as Coal tar pitch volatiles |
|
| PEL-STEL | REL-STEL | TLV-STEL | PEL-STEL | ||||
| PEL-C | REL-C | TLV-C | PEL-C | ||||
| Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
| Notes: |
Notes:
CARCINOGEN (Ca); COAL TAR PITCH VOLATILE, CYCLOHEXANE-EXTRACTABLE FRACTION. See Appendix A, NIOSH Potential Occupational Carcinogens and Appendix C, Supplementary Exposure Limits. |
Notes:
Visit the ACGIH TLV site for specific data |
Notes: | ||||
| Health factors: See NIH-NLM PubChem. | IDLH |
80 mg/m³ |
|||||
| Carcinogenic classifications: EPA-B2, IARC-1, NIOSH-Ca, NTP-R, TLV-A2 |
Notes:
Ca |
||||||
| AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3: | |||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Benzo[a]pyrene NIOSH: Pocket Guide to Chemical Hazards - Coal tar pitch volatiles Literature References
|
Last Updated Date : 04/02/2024
FORMALIN (as FORMALDEHYDE)‡
| CAS # | 50-00-0 |
|---|---|
| Formula |
CH₂O |
| Synonyms |
formic aldehyde; lysoform; methanal; oxomethane; oxymethylene solution; paraform; formaldehyde (solution) |
| Physical description | Nearly colorless gas with a pungent, suffocating odor. | ||
|---|---|---|---|
| Boiling point | 214°F | Molecular weight | varies |
| Freezing point/melting point | -134°F | Vapor pressure | 1 mmHg |
| Flash point | 185°F | Vapor density | 1.04 |
| Specific gravity | Ionization potential | 10.88 eV | |
| Lower explosive limit (LEL) | 7% | Upper explosive limit (UEL) | 73% |
| NFPA health rating | 3 | NFPA fire rating | 2 |
| NFPA reactivity rating | 0 | NFPA special instruction | |
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | |
|---|---|
| Sampling group | |
| Sampler/Sampling media | |
| Sampling time* |
|
| Sampling volume (TWA)* |
|
| Sampling flow rate (TWA)* |
|
| Sampling volume (STEL/Peak/C)* |
|
| Sampling flow rate (STEL/Peak/C)* |
|
| Analytical method instruments | |
| Method reference | |
| Notes | See FORMALDEHYDE. Do NOT use passive monitors to sample for formalin. |
| Special requirements |
|
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media |
|
|---|---|
| Bulk Method |
|
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA |
0.75 ppm [0.5 ppm Action Level] |
REL-TWA |
0.016 ppm |
TLV-TWA |
0.1 ppm [2016] |
PEL-TWA |
0.75 ppm [0.50 ppm Action Level] |
| PEL-STEL |
2 ppm |
REL-STEL |
|
TLV-STEL |
0.3 ppm [2016] |
PEL-STEL |
2 ppm |
| PEL-C |
|
REL-C |
0.1 ppm [15 minutes] |
TLV-C |
|
PEL-C |
|
| Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
| Notes: |
Notes:
CARCINOGEN (Ca): REDUCE EXPOSURE TO LOWEST FEASIBLE CONCENTRATION. See Appendix A, NIOSH Potential Occupational Carcinogens. |
Notes:
respiratory sensitizer (RSEN), dermal sensitizer (DSEN) |
Notes:
See California Code of Regulations; Title 8, §5217. Formaldehyde. |
||||
| Health factors: See NIH-NLM PubChem. | IDLH |
20 ppm |
|||||
| Carcinogenic classifications: IARC-1, NIOSH-Ca, NTP-R, OSHA-Ca, TLV-A1, EPA-B1 |
Notes:
Ca |
||||||
|
AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3:
1 ppm/10 ppm/40 ppm |
|||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Formaldehyde, solutions (formalin) (corrosive) NIOSH: Pocket Guide to Chemical Hazards - Formalin (as formaldehyde) Literature References
|
Last Updated Date : 12/29/2020
FORMALDEHYDE‡
| CAS # | 50-00-0 |
|---|---|
| Formula |
CH₂O |
| Synonyms |
methanal, methyl aldehyde, methylene oxide, formalin, oxymethylene, formic aldehyde, oxymethylene |
| Physical description | Colorless aqueous solution of formaldehyde with a pungent, irritating odor. Gas at ordinary conditions. | ||
|---|---|---|---|
| Boiling point | -6°F | Molecular weight | 30 |
| Freezing point/melting point | -134°F | Vapor pressure | >1 atm |
| Flash point | varies from 122-141°F | Vapor density | 1.04 |
| Specific gravity | Ionization potential | 10.88 eV | |
| Lower explosive limit (LEL) | 7% | Upper explosive limit (UEL) | 73% |
| NFPA health rating | 3 | NFPA fire rating | 4 |
| NFPA reactivity rating | 0 | NFPA special instruction | |
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | 1290 | 1290 |
|---|---|---|
| Sampling group | ||
| Sampler/Sampling media | XAD-2 tube (150/75 mg) coated with 10% 2-(hydroxymethyl)piperidine [SKC 226-117] | XAD-2 tube (23/45 mg) coated with 10% 2-(hydroxymethyl)piperidine [SKC 226-54] |
| Sampling time* | 240 min |
15 min |
| Sampling volume (TWA)* | 24 L |
|
| Sampling flow rate (TWA)* | 0.1 L/min |
|
| Sampling volume (STEL/Peak/C)* | 3 L
|
|
| Sampling flow rate (STEL/Peak/C)* |
0.2 L/min |
|
| Analytical method instruments | GC-NPD | GC-NPD |
| Method reference | OSHA 52 (fully validated) | OSHA 52 (fully validated) |
| Notes |
When formaldehyde and acrolein are sampled together, their sample volume must be 24 L |
Only use for formaldehyde STEL sampling.
|
| Special requirements |
|
|
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media |
|
|---|---|
| Bulk Method |
|
| Device | Detector tubes | Detector tubes | Detector tube | Detector tube |
|---|---|---|---|---|
| Model/Type | Matheson-Kitagawa 8014-171SB, 8014-171SA, 8014-171SC | Gastec 91, 91M, 91L, 91LL | Dräger - Formaldehyde 0.2/a, 6733081 | Dräger - Formaldehyde 2/a, 8101751 |
|
Sampling information (see manufacturer instructions) |
ranges vary, follow mfr instructions | 91: 0.5-2 strokes, 0.5-100 ppm range, uncertainty 25% for 2 to 6 ppm, 16.4% for 6 to 20 ppm, 91M: 0.5-2 strokes, approx 4-6400 ppm range, uncertainty 16.4% for 8 to 200 ppm, 8.2% for 500 to 2000 ppm, 91L: 1-2 strokes, approx 0.05-40 ppm range, uncertainty | 10 or 20 strokes, 0.1-5 ppm range, 33% uncertainty | 5 strokes, 0.5- 40 ppm range, 33% uncertainty |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA |
0.75 ppm [0.5 ppm Action Level] |
REL-TWA |
0.016 ppm |
TLV-TWA |
0.1 ppm [2016] |
PEL-TWA |
0.75 ppm [0.50 ppm Action Level] |
| PEL-STEL |
2 ppm |
REL-STEL |
|
TLV-STEL |
0.3 ppm [2016] |
PEL-STEL |
2 ppm |
| PEL-C |
|
REL-C |
0.1 ppm [15 minutes] |
TLV-C |
|
PEL-C |
|
| Skin notation |
N |
Skin notation |
Y |
Skin notation |
N |
Skin notation |
N |
| Notes: |
Notes:
CARCINOGEN (Ca): REDUCE EXPOSURE TO LOWEST FEASIBLE CONCENTRATION. See Appendix A, NIOSH Potential Occupational Carcinogens. |
Notes:
respiratory sensitizer (RSEN), dermal sensitizer (DSEN) |
Notes:
See California Code of Regulations; Title 8, §5217. Formaldehyde. |
||||
| Health factors: See NIH-NLM PubChem. | IDLH |
20 ppm |
|||||
| Carcinogenic classifications: IARC-1, NIOSH-Ca, NTP-R, OSHA-Ca, TLV-A1, EPA-B1 |
Notes:
Ca |
||||||
|
AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3:
1 ppm/10 ppm/40 ppm |
|||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Formaldehyde NIOSH: Pocket Guide to Chemical Hazards - Formaldehyde Literature References
|
Last Updated Date : 04/14/2021
PARAQUAT (PARAQUAT DICHLORIDE)†
| CAS # | 4685-14-7 |
|---|---|
| Formula |
C₁₂H₁₄N₂+2 |
| Synonyms |
1,1'-dimethyl-4,4'-bipyridinium dichloride; N,N'-dimethyl-4,4'-bipyridinium dichloride; paraquat chloride; paraquat dichloride |
| Physical description | [herbicide] [Note: Paraquat may also be found commercially as a methyl sulfate | ||
|---|---|---|---|
| Boiling point | decomposes | Molecular weight | 257.18 |
| Freezing point/melting point | 572°F (decomposes) | Vapor pressure | <0.0000001 mmHg |
| Flash point | Vapor density | ||
| Specific gravity | 1.24 | Ionization potential | |
| Lower explosive limit (LEL) | Upper explosive limit (UEL) | ||
| NFPA health rating | NFPA fire rating | ||
| NFPA reactivity rating | NFPA special instruction | ||
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | 1982 (respirable dust) |
|---|---|
| Sampling group | |
| Sampler/Sampling media | PTFE filter, 1 µm [SKC 225-2705] |
| Sampling time* | |
| Sampling volume (TWA)* | 40-1000 L |
| Sampling flow rate (TWA)* | 1-4 L/min |
| Sampling volume (STEL/Peak/C)* | |
| Sampling flow rate (STEL/Peak/C)* | |
| Analytical method instruments | HPLC-UV |
| Method reference | NIOSH 5003 (fully validated) |
| Notes | |
| Special requirements |
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media | |
|---|---|
| Bulk Method |
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA |
0.5 mg/m³ (resp dust) |
REL-TWA |
0.1 mg/m³ (resp) |
TLV-TWA |
0.05 mg/m³ (inhalable particulate matter) [2017] |
PEL-TWA |
0.5 mg/m³ (total particulates), 0.1 mg/m³ (respirable sizes) |
| PEL-STEL | REL-STEL | TLV-STEL | PEL-STEL | ||||
| PEL-C | REL-C | TLV-C | PEL-C | ||||
| Skin notation |
Y |
Skin notation |
Y |
Skin notation |
Y |
Skin notation |
Y |
| Notes: | Notes: | Notes: |
Notes:
See footnote [n] |
||||
| Health factors: See NIH-NLM PubChem. | IDLH |
1 mg/m³ |
|||||
| Carcinogenic classifications: TLV-A4 | Notes: | ||||||
| AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3: | |||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Paraquat dichloride NIOSH: Pocket Guide to Chemical Hazards - Paraquat (Paraquat dichloride) Literature References
|
Last Updated Date : 01/07/2021
CYANOGEN†
| CAS # | 460-19-5 |
|---|---|
| Formula |
C₂N₂ |
| Synonyms |
carbon nitride; dicyan; dicyanogen; ethanedinitrile; oxalonitrile |
| Physical description | Colorless gas with a pungent, almond-like odor. | ||
|---|---|---|---|
| Boiling point | -6°F | Molecular weight | 52.0 |
| Freezing point/melting point | -18°F | Vapor pressure | 5.1 atm at 70°F |
| Flash point | Vapor density | 1.82 | |
| Specific gravity | 0.95 (liquid at -6°F) | Ionization potential | 13.57 eV |
| Lower explosive limit (LEL) | 6.6% | Upper explosive limit (UEL) | 43% |
| NFPA health rating | 4 | NFPA fire rating | 4 |
| NFPA reactivity rating | 1 | NFPA special instruction | |
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | 0800 |
|---|---|
| Sampling group | |
| Sampler/Sampling media | XAD-2 tube (120/60 mg) coated with 10% 2-(hydroxymethyl)piperidine [SKC 226-118] |
| Sampling time* | |
| Sampling volume (TWA)* | 12 L |
| Sampling flow rate (TWA)* | 0.2 L/min |
| Sampling volume (STEL/Peak/C)* | |
| Sampling flow rate (STEL/Peak/C)* | |
| Analytical method instruments | GC-NPD |
| Method reference | OSHA PV2104 (partially validated) |
| Notes | |
| Special requirements |
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media | |
|---|---|
| Bulk Method |
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA |
10 ppm (Construction and Maritime industries only) |
REL-TWA |
10 ppm (20 mg/m³) |
TLV-TWA | PEL-TWA |
10 ppm (20 mg/m³) |
|
| PEL-STEL | REL-STEL | TLV-STEL | PEL-STEL | ||||
| PEL-C | REL-C | TLV-C |
5 ppm [2015] |
PEL-C | |||
| Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
|
Notes:
The OSHA PEL applies to Construction and Maritime Industries only. See 29 CFR 1926.55 Table 1 and 29 CFR 1915.1000 Table Z-Shipyards. |
Notes: | Notes: | Notes: | ||||
| Health factors: See NIH-NLM PubChem. | IDLH | ||||||
| Carcinogenic classifications: Not listed | Notes: | ||||||
| AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3: | |||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Cyanogen NIOSH: Pocket Guide to Chemical Hazards - Cyanogen Literature References
|
Last Updated Date : 06/02/2022
CYANAMIDE
| CAS # | 420-04-2 |
|---|---|
| Formula |
NH₂CN |
| Synonyms |
amidocyanogen; carbimide; carbodiimide; cyanogen nitride; hydrogen cyanamide |
| Physical description | Crystalline solid. | ||
|---|---|---|---|
| Boiling point | 500°F (decomposes) | Molecular weight | 42.1 |
| Freezing point/melting point | 113°F | Vapor pressure | |
| Flash point | 286°F | Vapor density | |
| Specific gravity | 1.28 | Ionization potential | 10.65eV |
| Lower explosive limit (LEL) | Upper explosive limit (UEL) | ||
| NFPA health rating | NFPA fire rating | ||
| NFPA reactivity rating | NFPA special instruction | ||
| Vapor hazard ratio (VHR) | |||
| Historical exceedance percentage | |||
| Target organs | |||
| Analyte code (IMIS no.) | |
|---|---|
| Sampling group | |
| Sampler/Sampling media | |
| Sampling time* | |
| Sampling volume (TWA)* | |
| Sampling flow rate (TWA)* | |
| Sampling volume (STEL/Peak/C)* | |
| Sampling flow rate (STEL/Peak/C)* | |
| Analytical method instruments | |
| Method reference | |
| Notes | |
| Special requirements |
* All sampling instructions above are recommended guidelines for OSHA Compliance Safety and Health Officers (CSHOs), please see the corresponding OSHA method reference for complete details.
| Wipe Sampler/Sampling media | |
|---|---|
| Bulk Method |
| Device | |||||
|---|---|---|---|---|---|
| Model/Type | |||||
|
Sampling information (see manufacturer instructions) |
|
OSHA PEL
8-hour TWA (ST) STEL (C) Ceiling Peak |
NIOSH REL
Up to 10-hour TWA (ST) STEL (C) Ceiling |
ACGIH TLV©
8-hour TWA (ST) STEL (C) Ceiling |
|||||
|---|---|---|---|---|---|---|---|
| PEL-TWA | REL-TWA |
2 mg/m³ |
TLV-TWA |
2 mg/m³ [1974] |
PEL-TWA |
2 mg/m³ |
|
| PEL-STEL | REL-STEL | TLV-STEL | PEL-STEL | ||||
| PEL-C | REL-C | TLV-C | PEL-C | ||||
| Skin notation |
NA |
Skin notation |
N |
Skin notation |
N |
Skin notation |
N |
|
Notes:
Not established |
Notes: | Notes: | Notes: | ||||
| Health factors: See NIH-NLM PubChem. | IDLH | ||||||
| Carcinogenic classifications: Not listed | Notes: | ||||||
| AIHA emergency response planning guidelines - ERPG-1/ERPG-2/ERPG-3: | |||||||
Additional Resources and Literature References
|
NOAA: CAMEO Chemicals - Cyanamide NIOSH: Pocket Guide to Chemical Hazards - Cyanamide Literature References
|
Last Updated Date : 12/22/2020