Letters of Interpretation

OSHA requirements are set by statute, standards, and regulations. Our interpretation letters explain these requirements and how they apply to particular circumstances, but they cannot create additional employer obligations. Each letter constitutes OSHA's interpretation of the requirements discussed.

Note that our enforcement guidance may be affected by changes to OSHA rules. Also, from time to time we update our guidance in response to new information.

These letters of interpretation and the standards they address may not apply to OSHA State Plans. State Plans are required to have standards and enforcement programs that are at least as effective as OSHA's and may have different or additional requirements. Please see OSHA-approved State Plans for more information.

NOTICE:

How to Request a Letter of Interpretation

Filters


Date Title Standard Number
Powered Industrial Truck (forklift) operator trainer qualifications. 1910.178, 1910.178(l)(2)(iii)
Clarification of Recordkeeping's work-related exception. 1904 - Table of Contents, 1904.5(b)(2)
Permissibility of using guardrail systems other than perimeter safety cables in steel erection. 1926.760(a)(1), 1926.760(a)(2), 1926.760(a)(3)
Acceptability of rhodizonate-based spot test kits for determining the presence or absence of lead in paint coatings. 1910.1025, 1926.62
OSHA policy on using wipe sampling for 4,4' methylenedianiline (MDA) as the basis for enforcement action. 1910.1050, 1910.1050(b), 1910.1050(f)(1)(ii), 1910.1050(l)(1), 1910.1050(l)(2), 1910.1050(l)(3)
Workplace use of electrical equipment designated as "Household Use Only" and recordkeeping requirements. 1910.303(a), 1910.303(b)(2), 1910.7, 1910.303(b), 1910.304(f)(5)(v)(C)(5)
Fall protection requirements during installation and removal or tarps and sheeting on/from scaffolds; qualifications of person determining safety on scaffold with wind imposed forces. 1926.451(g)(2), 1926.451(f)(12), 1926.451(g)(1), 1926.451(a)(6), 1926.451(f)(3), 1926.450
Motor-control-circuit switches and relays are prohibited from being used as energy isolating devices. 1910.147, 1910.147(c)(1), 1910.147(a)(2)(ii)
CSHO use of external GFCI testers to enforce 29 CFR 1926.404(b)(1) 1926.404, 1926.404(b)(1), 1926.404(b)(1)(i), 1926.404(b)(1)(ii), 1926.404(b)(1)(iii)
Clarification of 1926.502(d)(6) term "designed for" in snaphook connections. 1926.502, 1926.502(d), 1926.502(d)(6)
Requirements for fall protection when ladder jack scaffolds are used for residential and commercial construction 1926.451, 1926.451(g)(1), 1926.451(g)(1)(i), 1926.452, 1926.452(k)(1), 1926.500, 1926.500(a)(2)(i), 1926.501, 1926.501(b), 1926.501(b)(12), 1926.501(b)(13), 1926.501(b)(2), 1926.502, 1926.502(k), 1926.760
Acceptable methods to locate underground utility installations; evaluation of hydro-vacuum excavation. 1926.651, 1926.651(b)(2), 1926.651(b)(3)
Storage of Class IA and IB flammable liquids in glass containers. 1910.106, 1910.106(d)(2), 1910.106(d)(2)(iii)(a), 1910.106(d)(2)(iii)(a)(2)
Use of approved GFCI's that do not have open-neutral protection. 1926.404(b)(1)(i), 1926.404, 1926.404(b), 1926.404(b)(1)(ii), 1926.449
Marking and proof-testing requirements for special custom-designed lifting accessories. 1926.251, 1926.251(a), 1926.251(a)(4)
Maximum intervals for providing fixed-ladder landing platforms used in General Industry. 1910.27, 1910.27(d)(2)
Fall protection requirements for homes built of block and masonry construction. 1926.501, 1926.501(b), 1926.501(b)(13), 1926.502, 1926.502(k)
Electronic Mail Systems and Bloodborne Pathogens Training requirements. 1910.1030, 1910.1030(g)(2)(vii)(N), 1910.1030(g)(2)(viii)
Enforcement of manhole step specification requirements during rulemaking proceedings. 1910.27
Requirements for emergency response and planning under the Process Safety Management Standard. 1910.38(a), 1910.38(c)(3), 1910.119(n), 1910.120(a), 1910.120(q), 1910.120(q)(1), 1910.120(q)(6)(ii), 1910.120(q)(6)(iii)