1
10/03/2023 Electric Power Generation, Transmission and Distribution Standard
2
10/03/2023
Electric Power Generation, Transmission and Distribution Standard
3
08/16/2023 Minimum approach distance (MAD)
4
08/16/2023 Minimum approach distance (MAD)
5
02/23/2023 Frequency of refresher training for first aid and CPR
6
05/03/2021 Minimum approach distance (MAD) requirements covered under 1910.269 when installing protective grounding equipment
7
05/03/2021 Minimum approach distance (MAD) requirements covered under 1910.269 when installing protective grounding equipment
8
05/03/2021 Minimum approach distance (MAD) requirements covered under 1910.269 when installing protective grounding equipment
9
05/03/2021
Minimum approach distance (MAD) requirements covered under 1910.269 when installing protective grounding equipment
10
01/31/2020 Tagging transmission lines covered under, 1910.269(m)(3)(ii)
11
01/31/2020 Tagging transmission lines covered under, 1910.269(m)(3)(ii)
12
01/31/2020 Tagging transmission lines covered under, 1910.269(m)(3)(ii)
13
06/19/2019 First aid for bleeding control
14
12/22/2016 Enforcement of minimum approach distance requirements in 29 CFR 1910.269 and 29 CFR Part 1926, Subpart V
15
12/22/2016 Enforcement of minimum approach distance requirements in 29 CFR 1910.269 and 29 CFR Part 1926, Subpart V
16
12/22/2016
Enforcement of minimum approach distance requirements in 29 CFR 1910.269 and 29 CFR Part 1926, Subpart V
17
07/15/2016 Use of Zip Ties As An Additional Means of Control for Tagout under 1910.269(d)
18
07/15/2016 Use of Zip Ties As An Additional Means of Control for Tagout under 1910.269(d)
19
07/15/2016 Use of Zip Ties As An Additional Means of Control for Tagout under 1910.269(d)
20
10/02/2015 Minimum approach distances to electric power transmission and distribution lines during the installation of protective grounds
21
10/02/2015 Minimum approach distances to electric power transmission and distribution lines during the installation of protective grounds
22
10/02/2015 Minimum approach distances to electric power transmission and distribution lines during the installation of protective grounds
23
10/02/2015 Heat energy estimates for arc-rated protective clothing and faceshields for open-air work on multi-phase overhead power lines.
24
10/02/2015 Minimum approach distances to electric power transmission and distribution lines during the installation of protective grounds
25
10/02/2015 Heat energy estimates for arc-rated protective clothing and faceshields for open-air work on multi-phase overhead power lines.
26
07/13/2015 Requirements for protective clothing and equipment in the Electric Power Generation, Transmission and Distribution Standard.
27
07/13/2015 Requirements for protective clothing and equipment in the Electric Power Generation, Transmission and Distribution Standard.
28
07/13/2015 Selecting protective clothing based on the IEEE National Electrical Safety Code, C-2, 2012, Table 410-1
29
07/13/2015 Selecting protective clothing based on the IEEE National Electrical Safety Code, C-2, 2012, Table 410-1
30
07/13/2015 Selecting protective clothing based on the IEEE National Electrical Safety Code, C-2, 2012, Table 410-1
31
07/13/2015
Requirements for protective clothing and equipment in the Electric Power Generation, Transmission and Distribution Standard.
32
07/01/2015 Guarding energized electrical parts within cable trays (H.D. Roberts Jr/DEP/GIE/Harvey/26006)
33
07/01/2015 Guarding energized electrical parts within cable trays (H.D. Roberts Jr/DEP/GIE/Harvey/26006)
34
07/17/2014 Fall protection requirements while working from an elevated location above four feet.
35
07/17/2014 Fall protection requirements while working from an elevated location above four feet.
36
07/17/2014 Fall protection requirements while working from an elevated location above four feet.
37
07/17/2014 Fall protection requirements while working from an elevated location above four feet.
38
01/31/2013 Fixed ladders inside wind turbine towers
39
11/21/2012
Minimum approach distances for conductive objects to exposed energized parts.
40
08/02/2012
Clarification of OSHA training requirements for basic first aid and cardiopulmonary resuscitation (CPR).
41
08/01/2012
Hooking and Unhooking Loads with a Helicopter During Work on Electric Transmission Systems
42
04/24/2012
Numerous questions related to training requirements under 1910.269.
43
08/29/2011
Rescue and retrieval requirements for enclosed spaces covered under 1910.269.
44
08/04/2011
Numerous questions on lockout/tagout under 1910.147 and 1910.269
45
02/03/2010 Clarification on number of qualified employees required when working with electrical components.
46
02/03/2010 Clarification on number of qualified employees required when working with electrical components.
47
02/03/2010
Clarification on number of qualified employees required when working with electrical components.
48
03/16/2009 Payment for body belts, positioning straps, and pole and tree climbers.
49
03/16/2009 Payment for body belts, positioning straps, and pole and tree climbers.
50
03/16/2009 Payment for body belts, positioning straps, and pole and tree climbers.
51
03/16/2009 Payment for body belts, positioning straps, and pole and tree climbers.
52
02/19/2008 Compliance with electric power generation transmission and distribution requirements for testing of fiberglass insulating tools.
53
02/19/2008 Compliance with electric power generation transmission and distribution requirements for testing of fiberglass insulating tools.
54
02/19/2008 Compliance with electric power generation transmission and distribution requirements for testing of fiberglass insulating tools.
55
02/19/2008
Compliance with electric power generation transmission and distribution requirements for testing of fiberglass insulating tools.
56
02/01/2008 Whether shutting off the truck and disabling controls is a sufficient means of demonstrating that no employee would be endangered under 1910.269(p)(1)(iii).
57
02/01/2008
Whether shutting off the truck and disabling controls is a sufficient means of demonstrating that no employee would be endangered under 1910.269(p)(1)(iii).
58
01/31/2008 PSM coverage of utility systems; whether 1910.269 preempts the PSM standard for power generation facilities that serve covered processes.
59
01/31/2008 PSM coverage of utility systems; whether 1910.269 preempts the PSM standard for power generation facilities that serve covered processes.
60
01/31/2008 PSM coverage of utility systems; whether 1910.269 preempts the PSM standard for power generation facilities that serve covered processes.
61
01/31/2008
PSM coverage of utility systems; whether 1910.269 preempts the PSM standard for power generation facilities that serve covered processes.
62
10/10/2007 Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
63
10/10/2007 Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
64
10/10/2007 Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
65
10/10/2007 Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
66
10/10/2007 Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
67
10/10/2007 Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
68
10/10/2007
Clarification of the 1910.269 requirement for the presence of at least two "qualified" employees for work on exposed energized lines.
69
06/26/2007 Clarification of LOTO procedures for servicing and maintenance of wind turbines.
70
06/26/2007 Clarification of LOTO procedures for servicing and maintenance of wind turbines.
71
06/26/2007
Clarification of LOTO procedures for servicing and maintenance of wind turbines.
72
03/23/2007 Clarification of "in near proximity" and OSHA's discretion in enforcing first aid requirements in particular cases.
73
03/23/2007
Clarification of "in near proximity" and OSHA's discretion in enforcing first aid requirements in particular cases.
74
01/16/2007 OSHA requirements for providing training for first aid, CPR, and BBP for prompt treatment of injured employees at various workplaces.
75
01/16/2007
OSHA requirements for providing training for first aid, CPR, and BBP for prompt treatment of injured employees at various workplaces.
76
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
77
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
78
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
79
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
80
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
81
11/21/2006 Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
82
11/21/2006
Qualifications required under 1910.269 for entry into manholes/vaults to perform work on energized conductors.
83
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
84
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
85
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
86
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
87
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
88
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
89
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
90
10/19/2006 Use of live-line tools and exemption to the requirement for at least two employees to be present during work on an energized part.
91
10/04/2006 Requirements for embroidery on flame-resistant clothing under 29 CFR 1910.269.
92
10/04/2006
Requirements for embroidery on flame-resistant clothing under 29 CFR 1910.269.
93
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
94
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
95
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
96
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
97
09/01/2006 Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
98
09/01/2006
Conditions allowing the use of insulating gloves without the use of insulating sleeves when working on or near exposed energized parts.
99
07/20/2006 Clarification of supervisor accessibility to individual field-lock keys in a group lock box under 1910.269.
100
07/20/2006 Clarification of supervisor accessibility to individual field-lock keys in a group lock box under 1910.269.
101
07/20/2006 Clarification of supervisor accessibility to individual field-lock keys in a group lock box under 1910.269.
102
07/20/2006 Clarification of supervisor accessibility to individual field-lock keys in a group lock box under 1910.269.
103
07/20/2006
Clarification of supervisor accessibility to individual field-lock keys in a group lock box under 1910.269.
104
07/19/2006 Group LOTO and supervisor's accessibility to individual employee lock when employee is not available to remove lock.
105
07/19/2006 Group LOTO and supervisor's accessibility to individual employee lock when employee is not available to remove lock.
106
07/19/2006 Group LOTO and supervisor's accessibility to individual employee lock when employee is not available to remove lock.
107
07/19/2006 Group LOTO and supervisor's accessibility to individual employee lock when employee is not available to remove lock.
108
06/13/2003
Response to Exelon Generation's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
109
07/19/2006
Group LOTO and supervisor's accessibility to individual employee lock when employee is not available to remove lock.
110
04/25/2006 Conditions rendering underground electrical power connections as unsafe to touch with bare hands.
111
04/25/2006 Conditions rendering underground electrical power connections as unsafe to touch with bare hands.
112
04/25/2006
Conditions rendering underground electrical power connections as unsafe to touch with bare hands.
113
11/22/2005
Enhanced risk of damage/degradation of insulation integrity on temporary wiring with prolonged use
114
11/01/2005
CPR training is a required element in some OSHA general industry standards.
115
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
116
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
117
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
118
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
119
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
120
09/27/2005 Determining voltage ratings for electrical insulating equipment used during electrical power distribution and transmission work.
121
03/07/2005 Network protectors must have the manual override position blocked, locked, or otherwise disabled; must need use of a tool to manually place in closed position.
122
10/05/2004 Grounding requirements for aerial lifts (bucket trucks) under the General Industry 1910.269 and Construction 1926.952 standards.
123
10/05/2004 Grounding requirements for aerial lifts (bucket trucks) under the General Industry 1910.269 and Construction 1926.952 standards.
124
10/05/2004 Grounding requirements for aerial lifts (bucket trucks) under the General Industry 1910.269 and Construction 1926.952 standards.
125
10/05/2004
Grounding requirements for aerial lifts (bucket trucks) under the General Industry 1910.269 and Construction 1926.952 standards.
126
04/27/2004 Rescue of a suspended worker following a fall event.
127
04/27/2004
Rescue of a suspended worker following a fall event.
128
03/09/2004 Requirements for reverse signal alarms for vehicles with obstructed views to the rear.
129
03/09/2004 Requirements for reverse signal alarms for vehicles with obstructed views to the rear.
130
03/09/2004
Requirements for reverse signal alarms for vehicles with obstructed views to the rear.
131
09/16/2003 Minimum number of employees required for performing electric power work conducted from bucket trucks.
132
09/16/2003 Minimum number of employees required for performing electric power work conducted from bucket trucks.
133
09/16/2003 Minimum number of employees required for performing electric power work conducted from bucket trucks.
134
09/16/2003
Minimum number of employees required for performing electric power work conducted from bucket trucks.
135
06/13/2003 Response to Exelon Generation's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
136
06/13/2003 Response to Exelon Generation's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
137
06/13/2003 Response to Edison Electric Institute's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
138
06/13/2003 Response to Edison Electric Institute's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
139
06/13/2003
Response to Edison Electric Institute's concerns regarding draft Instruction CPL 2-1.18A, "Enforcement of the Electric Power Generation, Transmission and Distribution Standard."
140
05/27/2003 OSHA does not specify payment requirements for apparel covered in the Electrical Power Transmission and Distribution Standard.
141
03/27/2003 Clarification of qualified employee requirements for the Electric Power Generation, Transmission, and Distribution standard.
142
03/27/2003 Clarification of qualified employee requirements for the Electric Power Generation, Transmission, and Distribution standard.
143
03/27/2003 Clarification of qualified employee requirements for the Electric Power Generation, Transmission, and Distribution standard.
144
02/26/1996
Minimum approach distances
145
12/07/1995
Interpretation of the electric power generation, transmission, and distribution standard.
146
05/27/2003
OSHA does not specify payment requirements for apparel covered in the Electrical Power Transmission and Distribution Standard.
147
03/27/2003 Clarification of qualified employee requirements for the Electric Power Generation, Transmission, and Distribution standard.
148
03/27/2003
Clarification of qualified employee requirements for the Electric Power Generation, Transmission, and Distribution standard.
149
09/26/2002 Use of ANSI C2-1997 as guidance for protecting employees working near insulated shielded conductors
150
09/26/2002 Use of ANSI C2-1997 as guidance for protecting employees working near insulated shielded conductors
151
09/26/2002 Use of ANSI C2-1997 as guidance for protecting employees working near insulated shielded conductors
152
09/26/2002 Use of ANSI C2-1997 as guidance for protecting employees working near insulated shielded conductors
153
09/26/2002 Use of ANSI C2-1997 as guidance for protecting employees working near insulated shielded conductors
154
05/17/2002 Training requirements for employees who perform non-electrical work on electrical equipment.
155
05/17/2002 Training requirements for employees who perform non-electrical work on electrical equipment.
156
05/17/2002 Training requirements for employees who perform non-electrical work on electrical equipment.
157
01/29/2002 Authorized employees must have the opportunity to verify energy isolation in group lockout/tagout
158
01/03/2002 Tagout devices must be non-reusable and self-locking.
159
01/03/2002 Tagout devices must be non-reusable and self-locking.
160
08/27/2001 Two employees must be present during work on energized systems >600 volts
161
08/27/2001 Two employees must be present during work on energized systems >600 volts
162
11/21/2000 Clarification of system operator exclusive control provisions.
163
11/21/2000 Clarification of system operator exclusive control provisions.
164
11/21/2000 Clarification of system operator exclusive control provisions.
165
06/09/2000 Clarification of single and multiple crews for purposes of deenergizing lines.
166
03/22/2000 Lockout/tagout: preferred means of energy isolation; non cord-and-plug powered equipment.
167
03/10/2000 Clarification of training requirements for supervisory and managerial personnel under 1910.269.
168
02/10/2000 Exceptions to minimum approach distances for power generation, transmission and distribution
169
02/10/2000 Exceptions to minimum approach distances for power generation, transmission and distribution
170
01/14/2000 Use of tagout device attachments not meeting 50-pound unlocking strength requirements.
171
01/14/2000 Use of tagout device attachments not meeting 50-pound unlocking strength requirements.
172
12/06/1999 1910.269: Application of personal protective grounds for employee protection
173
12/06/1999 1910.269: Application of personal protective grounds for employee protection
174
12/06/1999 1910.269: Application of personal protective grounds for employee protection
175
12/06/1999 1910.269: Application of personal protective grounds for employee protection
176
10/26/1999 Minimum approach distances when using insulating gloves and sleeves.
177
10/14/1999 Group tagging requirements reqarding 1910.269(d).
178
08/03/1999 Appropriate safety practices for the removal of electrical meters.
179
08/03/1999 Appropriate safety practices for the removal of electrical meters.
180
06/10/1999 Fall protection and foot protection for power line workers.
181
06/09/1999 Training of workers who are not "qualified persons" under 1910.269.
182
06/09/1999 Training of workers who are not "qualified persons" under 1910.269.
183
04/26/1999 Clarification of 1910.269 as applied to line-clearance tree-trimming operations
184
04/26/1999 Clarification of 1910.269 as applied to line-clearance tree-trimming operations
185
04/26/1999 Clarification of 1910.269 as applied to line-clearance tree-trimming operations
186
02/22/1999 CPR/first aid training and "working alone" provisions of 1910.269
187
02/22/1999 CPR/first aid training and "working alone" provisions of 1910.269
188
02/22/1999
CPR/first aid training and "working alone" provisions of 1910.269
189
12/21/1998 Application of 1910.269 to aerial lift devices.
190
10/29/1998
Apparel requirements for line-clearence tree-trimmers
191
06/22/1998 Stress cone work: worker protection and job briefings
192
06/22/1998 Stress cone work: worker protection and job briefings
193
06/22/1998 Stress cone work: worker protection and job briefings
194
06/22/1998 Stress cone work: worker protection and job briefings
195
06/22/1998 Stress cone work: worker protection and job briefings
196
06/22/1998 Stress cone work: worker protection and job briefings
197
06/22/1998 Stress cone work: worker protection and job briefings
198
06/22/1998 Stress cone work: worker protection and job briefings
199
06/22/1998
Stress cone work: worker protection and job briefings
200
04/20/1998 Fall protection during electrical maintenance and construction work on aerial lifts.
201
12/18/1997
Electrical Conductor Identification.
202
06/23/1997
Clarification o-f the electric power generation, transmission, and distribution standard.
203
02/19/1997
An interpretation of the electric power generation standard
204
08/23/1996
Interpretation of the electic power generation, transmission and distribution (electric power generation) standard.
205
08/16/1996
Distinction between premises wiring installations and electric transmission or distribution installations.
206
08/06/1996
Electrical Workers
207
06/04/1996
Interpretation of the electric power generation, transmission, and distribution standard
208
05/20/1996
Letter requesting interpretation of the OSHA electrical standards as they apply to employees using insulated hand tools
209
03/26/1996
Electric power generation, transmission, and distribution standard.
210
03/05/1996
Determination on whether the "Line Journeyman Changing out Trasformer" activities are within the intent of the OSHA standards.
211
02/26/1996
Clarification of Occupational Safety and Health Administration (OSHA) regulations.
212
12/07/1995
Installation and Placement of temporary protective grounds
213
11/27/1995
Challenge Testing as a Substitute for Annual Refresher Training.
214
08/29/1995
Clarification of the Electric Power Generation, Transmission and Distribution Standard.
215
08/10/1995
Guidelines for the Enforcement of the Apparel Standard
216
07/31/1995
A qualified employee wearing a short sleeve shirt when working on or nearby energized electric power line or equipment and subject to potential exposure to an electric arc.
217
07/28/1995
Clarification of the electric power generation, transmission, and distribution standard.
218
07/27/1995
Interpretation of the Electric Power Generation, Transmission, and Distribution Standard.
219
06/21/1995
Imposing an undue hardship on the working man who is trying to do his job by keeping the electricity on for America to enjoy.
220
05/09/1995 Clarification of the Electric Power Generation, Transmission, And Distribution Standard, 29 CFR 1910.269.
221
05/09/1995
Clarification of the Electric Power Generation, Transmission, And Distribution Standard, 29 CFR 1910.269.
222
04/12/1995
Section that requires the employer to insure that apparel worn by employees not increase the injury should they be exposed to flame.
223
03/07/1995
Enforcement of Electric Power Generation, Transmission, and Distribution and Electrical Protective Equipment.
224
02/02/1995
Clarification of the Electric Power Generation, Transmission, and Distribution Standard.
225
12/01/1994
Final Rule on Electric Power Generation, Transmission, and Distribution.
226
11/08/1994
Interpretation of the Electrical Power Generation, Transmission, and Distribution standard.
227
08/08/1994
Permit space entry
228
07/18/1994
Clarification of electric power generators, transmission and distribution standard
229
05/24/1994
Natural fabrics and synthetic materials that are acceptable under the electric power generation, transmission and distribution standard.
