Oil and Gas Well Drilling and Servicing eTool

Oil and Gas Well Drilling and Servicing » Site Map

• Home
  • Job Safety Analysis (JSA)
    • Sample Worksheet
  • Glossary of Terms
  • Illustrated Glossary
  • Safety and Health Topics Page
  • Additional References
  • Credits
• General Safety and Health
  • Safety and Health Program
    • Need assessment/gap analysis
    • Contractor coordination
    • Initial planning
    • Risk assessment/hazard analysis/job safety analysis
    • Work rules and procedures
    • Worker training
    • Incident and near miss/hit reporting
    • Emergency planning and response
    • Housekeeping
    • PPE
    • Safety and health management systems
  • Common Wellsite Incidents and Fatalities
    • Motor vehicle incidents
    • Struck-by, caught-in, or caught between incidents
    • Falls from Heights
    • Fires and explosions
    • Slips, trips and falls (same level)
    • Asphyxiation
    • Electrocution
    • Sprains and strains
  • Equipment Condition
    • Selection and installation of proper equipment
    • Changes to equipment
    • Corrosion and metal fatigue
    • Inspection, maintenance, and repair
  • Site Conditions
    • Weather
    • Heat stress
    • Cold stress
    • Sanitation
    • Animals, plants, and insects
  • Hot Work
    • Fire and explosion hazards
    • Exposure hazards
    • Confined space and LOTO permits
    • Welding, cutting, brazing, and grinding hazards
    • Cylinder Storage and Handling
  • H₂S Safety and Health Hazards
    • Exposure to H₂S by inhalation
    • H₂S accumulation and knockdown
    • H₂S fire and explosion hazards
    • H₂S metal fatigue
    • Additional information for H₂S
  • Other Available Resources
• Site Preparation
  • Leveling, excavating, digging, and trenching
• Conductor Hole, Rathole and Mousehole
  • Conductor hole and pipe
  • Rathole
  • Mousehole
• Transportation
  • Transporting Personnel
  • Transporting Equipment
  • Vehicle Operation at the Well Site
  • All-Terrain Vehicles (ATVs) and Utility Vehicles (UTVs)
  • Additional Resources

• Drilling
  • Rigging Up
    • Setting up the substructure
    • Setting up the rig floor and mast or derrick
    • Installing handrails, guardrails, stairs, walkways, and ladders
    • Installing the power system
    • Rigging up the circulating system
    • Installing the auxiliary equipment
    • Inspecting the rig
    • Rigging Down
  • Drilling Ahead
    • Handling tubulars
    • Preparing drilling fluid
    • Starting drilling
    • Making a connection
      • Preparing to break out pipe
      • Breaking out pipe
      • Making up pipe in mousehole
      • Raising the kelly and new joint
      • Adding pipe to the string
    • Resuming drilling
    • Coring
    • Safety Data Sheet (SDS)
  • Tripping Out/In
    • Setting slips
    • Breaking out and setting back the kelly
    • Attaching elevators to the elevator links
    • Latching elevators to pipe
    • Working on the monkeyboard
    • Breaking out pipe
    • Maneuvering pipe to racking area
    • Tripping in - latching elevators to top of stand
  • Casing Operations
    • Installing casing tools
    • Running casing into the hole
    • Installing casing accessories
    • Circulating and cementing
  • Maintenance Activities
    • Rig floor
    • Drilling line maintenance
    • Wire rope maintenance
    • Mud circulating system
    • Generator, electric motors, and electrical systems
    • Engines
    • Derrick equipment maintenance
  • Well Control
    • Blowout prevention program
    • Monitoring and maintaining mud system
    • Installing BOPs, accumulator, and choke manifold
    • Testing BOPs, accumulators, and choke manifold
    • Maintaining surface control system
  • Well Completion
    • Conducting drill stem test
    • Setting production casing
    • Installing production tubing
    • Starting production flow
    • Hydraulic fracturing
    • Beam pumping units
• Servicing
  • Transporting Rig and Rigging Up
    • Transporting rig
    • Rigging up service rig
    • Setting up work area
  • General Services
    • Removing the horsehead
    • Removing the wellhead
    • Pulling and running rods
    • Pulling and running tubing
  • Special Services
    • Wireline operations
    • Well logging
    • Perforating
    • Cementing
    • Stimulation
    • Swabbing
    • Hot oiling
    • Snubbing
    • Coil tubbing
  • Workover
    • Sand cleanout
    • Repairing liners and casing
    • Well Recompletions
      • Sidetracking
      • Plug-Back
• Plugging and Abandoning Oil and Gas Wells
  • Wellsite preparation
  • Freepoint/Backoff wireline, stretching, and cutting operations
  • Removing tubular operations
  • Fishing tool operations
  • Placing cement plugs
  • Returning location to specified conditions