#	Standard Interpretations
1	03/16/2009 - 1926.302, 1926.302(a)(1) - Whether electric hand tools disassembled and deemed irreparable by a tool repair service are required to be returned disassembled.
2	05/11/2005 - 1926.302, 1926.302(e), 1926.302(e)(6) - Requirements for leaving construction equipment and powder-actuated tools unattended on a construction building site; impalement protection from reinforcing steel for masonry workers on a scaffold.
3	05/19/2003 - 1926.302, 1926.302(a), 1926.302(a)(1) - Repair requirements for the cord plug (attachment plug) of double-insulated tools.
4	12/11/2001 - 1926.302 - Guarding requirements for a rotary pneumatic angle-drive hand-held tool.
5	09/05/1995 - 1926.302 - Statement of compliance from OSHA for a pole-mounted powder actuated tool.
6	12/12/1986 - 1926.302 - Laboratory testing requirements for hand-held electrical construction tools.
7	04/08/1982 - 1926.302 - Pneumatic tools must be designed and used in accordance with good engineering practices
8	03/02/1982 - 1926.302 - Fasteners used in tools shall be only those specifically manufactured for use in such tools.
9	05/14/1979 - 1926.302 - Pneumatically operated staplers.
10	04/03/1978 - 1926.302 - The requirement for fire resistant fluids does not apply to hydraulic tools.
11	02/06/1978 - 1926.302 - If work may accidently come into contact with an energized line, do not use a conductive hose.

#	Regulations
1	03/14/2001 - 1926.302 - Power-operated hand tools.

#	Federal Register
1	09/16/1988 - 1926.302 - 53:36009 - Hand Tools, Power-Operated; Correction