US Dept of Labor

Occupational Safety & Health AdministrationWe Can Help

Slide 12

Slide 12


TEXT VERSION OF SLIDE:

    Title: Alternative Methods Allowed Under 1926.501(b)
    Type: Text Slide
    Content:

    • 1926.501(b)(8)(i) - Equipment guards can be used to prevent workers from falling into dangerous equipment.
    • 1926.501(b)(10) - A combination of a warning line system and safety monitoring system can be used for roffing work on low-slope (4:12 or less) roofs. Or, on roofs 50-feet (15.25 m) or less in width, the use of a safety monitoring system without a warning line system is permitted.
    At the bottom left is slide number 12.

    At the bottom right is OSHA's logo.

    Speaker Notes:

    If an employer can use one of these methods for the specified process, they can do so without developing a site specific fall protection plan.
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close