Powered by GoogleTranslate
Standard Interpretations - Table of Contents
• Standard Number: 1926.1000(a)(2); 1928.51(b)(1)

April 6, 1976

Mr. Darrell E. Wolbers,
Statutory Regulations
J I Case
700 State Street
Racine, Wisconsin 53404

Dear Mr. Wolbers:

This is in response to your letter of February 26, 1976, addressed to Mr. Fred Stockmeir, or our Chicago Regional Office, regarding Rollover Protection Structures (ROPS) on skid-steer loaders used in agricultural operations. In addition, it confirms a telephone conversation with a member of my staff.

Your specific question is: Do skid-steer loaders when used in agricultural operations have to conform to 29 CFR 1928.51(b)(1) which requires ROPS on each tractor operated by an employee?

The answer is no. The negative answer is in agreement with Construction standard 29 CFR 1926.1000(a)(2) [incorporated by reference in 29 CFR 1928.51(b)(1)]. This construction standard 29 CFR 1926.1000(a)(2) reads:

The promulgation of specific standards for rollover protective structures for compactors and rubber-tired skid-steer equipment is reserved pending consideration of standards currently being developed.

A Program Directive covering this subject will be issued in the near future.

If I may be of any further assistance, please feel free to contact me.


John K. Barto, Chief
Division of Occupational Safety Programming

Standard Interpretations - Table of Contents

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.