Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 3 3
Current Violations 3 3
Initial Penalty $10,400 $0 $0 $0 $0 $10,400
Current Penalty $10,400 $0 $0 $0 $0 $10,400
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 503010501 12/05/2013 02/18/2014 $2,400 $2,400 $0 P - Petition to Mod Abatement
  2. 01002 Serious 19100147 D04 I 12/05/2013 12/30/2013 $4,000 $4,000 $0 -
  3. 01003 Serious 19100147 F01 II 12/05/2013 12/30/2013 $4,000 $4,000 $0 -

Accident Investigation Summary
Summary Nr: 200627032 Event: 06/16/2013Employee Is Struck By Axis Arm< Later Dies
At approximately 12:50 a.m. on June 16, 2013, Employee #1 was working in a maintenance crew replacing a gear reducer and gaskets on an articulating robot. Employee #1 walked under the axis arm of the robot at the same time the arm, along with axes and welding tooling, mounted at the end of axis arm. The arm pivoted around the axis and collapsed into another axis arm, perpendicular to the floor. Employee #1 was caught between the tooling axis arms and the robot. Employee #1 was taken to the hospital with multiple blunt force injuries, where he later died.
Keywords: maintenance, robot, collapse, struck by, arm
Inspection Degree Nature Occupation
1 317243293 Fatality Concussion Machinery maintenance occupations

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.