Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail



Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 5 5
Current Violations 5 5
Initial Penalty $625 $0 $0 $0 $0 $625
Current Penalty $625 $0 $0 $0 $0 $625
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19260021 B02 06/28/2013 08/14/2013 $125 $125 $0 -
  2. 01002 Serious 19260352 C 06/28/2013 08/14/2013 $125 $125 $0 -
  3. 01003 Serious 19260405 G02 IV 06/28/2013 08/14/2013 $125 $125 $0 -
  4. 01004 Serious 19260502 D16 III 06/28/2013 08/14/2013 $125 $125 $0 -
  5. 01005 Serious 19260850 E 06/28/2013 08/14/2013 $125 $125 $0 -

Accident Investigation Summary
Summary Nr: 200535854 Event: 05/20/2013Worker Is Burned In Grain Dust Explosion
On May 20, 2013, Employee #1, of Global Ag Incorporated, an agricultural grain storage building equipment contractor, was performing demolition operations with employees of a millwright contractor and a crane company. They were removing obsolete grain handling equipment in preparation for the installation of new, higher capacity equipment. The equipment being removed was on top of a concrete silo owned by Global Ag. The millwright contractor's employees, including Coworkers #1 and #2, were removing all equipment related to the leg elevator and distributor. Coworker #1 was operating a manual chain hoist to lower portions of equipment (flow retarder, cushion and/or baffle) just above where the already removed distributor would have been. Coworker #2 was in the process of cutting the four thread bolts that held the equipment together. The second bolt needed to be cut but could not be reached from the catwalk on which Coworker #2 stood. Coworker #2 had left his fall protection equipment in the trailer. Therefore, Employee #2 used his fall arrest system and tied off on the super structure. He was standing approximately 9 feet above the walking/working surface, that is, the top of the silo. The equipment they were removing had one open hole in the top and one open hole in the bottom. It was a very windy day. Employee #1 used an oxy-acetylene torch to cut the second bolt. Combustible dust exploded and created a flash fire, which caused Employee #1 to fall. Employee #1's 6-foot Protecta brand shock absorbing lanyard partially activated and broke his fall. Coworker #1 called for emergency services and then helped Employee #1 remove his harness, enter an aerial lift, and return to the ground. Employee #1 was transported by emergency response personnel to the nearest hospital and then flown to a hospital burn unit in Iowa City. He was hospitalized and treated for burns to his arms, face, head, and neck.
Keywords: burn, dismantling, grain, construction, explosion, fall, fall protection, combustible dust, grain dust, silo
Inspection Degree Nature Occupation
1 317147973 Hospitalized injury Burn/Scald(Heat) Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close