Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 316673284 - R C Akers Inc

Inspection Information - Office: Ca Van Nuys

Nr: 316673284Report ID: 0950643Open Date: 03/26/2014

R C Akers Inc
41050 13th St West
Palmdale, CA 93551
Union Status: NonUnion
SIC: 1521/General Contractors-Single-Family Houses
NAICS: 236118/Residential Remodelers

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:07/07/2014
Emphasis: S:Construction (Cship)Close Case:12/15/2015

Related Activity:TypeIDSafetyHealth
 Accident102901402    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 2 3
Current Violations 1 2 3
Initial Penalty $2,360 $0 $0 $5,350 $0 $7,710
Current Penalty $900 $0 $0 $1,075 $0 $1,975
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342 A 07/08/2014 08/10/2014 $1,000 $5,000 $0 07/17/2014 F - Formal Settlement
  2. 01002 Other 3395 F03 07/08/2014 08/10/2014 $75 $350 $0 07/17/2014 F - Formal Settlement
  3. 02001 Serious 1509 A 07/08/2014 07/26/2014 $900 $2,360 $0 07/17/2014 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 202659009Event: 01/13/2014Worker Cuts Hand While Operating Circular Hand Saw
On January 13, 2014, Employee #1, employed by a general building contractor, was engaged in exterior carpentry at a building. He was working on a saw horse and operating a portable circular hand saw, Skilsaw Serial Number 203000902, attempting to cut a 6-inch notch off a 2 by 4 piece of wood. Employee #1 used his left hand to hold down the 2 by 4 and his right hand to cut the 2 by 4 with the hand saw's 7.25-inch diameter blade. The hand saw kicked back and cut Employee #1's left hand. Emergency services were called, and Employee #1 was transported to the hospital, where he was admitted and treated for a laceration to his left hand. This event was reported to Cal/OSHA on January 17, 2014. The subsequent investigation determined that Employee #1's supervisor was in the office when the event occurred. The investigation report stated that causal factors were the employee's failure to clamp down the material that he was cutting, and his failure to secure proper operation of the saw by using both hands to cut the material.
Keywords: wood slab, unsecured, carpenter, equipment operator, construction, circular saw, saw, laceration, hand
Inspection Degree Nature Occupation
1 316673284 Hospitalized injury Cut/Laceration Construction laborers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close