Powered by GoogleTranslate

Inspection Detail

Inspection: 316346345 - V & H Performance, Llc

Inspection Information - Office: Monrovia District Office

 

Inspection Nr: 316346345
Report ID: 0950644
Date Opened: 02/07/2013

Site Address:
V & H Performance, Llc
13861 Rosecrans Ave
Santa Fe Springs, CA 90670

Mailing Address:
, , 00000

Union Status: NonUnion

SIC:3471

NAICS: 332813/ Electroplating, Plating, Polishing, Anodizing, and Coloring


Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 07/23/2013

Planning Guide: Safety-Manufacturing

Emphasis:

Case Closed: 07/27/2015


Related Activity
Type Activity Nr Safety Health
Accident 102717394
Violation Summary
Violations/Penalties Serious Willful Repeat Other Unclass Total
Initial Violations 1 1 2
Current Violations 1 1 2
Initial Penalty $18,000 $0 $0 $1,125 $0 $19,125
Current Penalty $2,000 $0 $0 $119 $0 $2,119
FTA Penalty $0 $0 $0 $0 $0 $0

Violation Items
# Citation ID Citaton Type Standard Cited Issuance Date Abatement Due Date Current Penalty Initial Penalty FTA Penalty Contest Latest Event Note
1. 01001 Other 3203 A 07/23/2013 08/25/2013 $119 $1,125 $0 F - Formal Settlement  
2. 02001 Serious 4206 A 07/23/2013 08/02/2013 $2,000 $18,000 $0 F - Formal Settlement  

Investigation Summary

Investigation Nr: 202479101
Event: 01/23/2013
Employee Amputates Finger When Caught by Tube Machine

At approximately 8:30 a.m. on January 23, 2013, Employee #1, a machine operator, was operating a tube bending machine (Eagle EPT60 Serial Number: 770006) to bend and form steel tubes. The employee was loading a pipe approximately 2 in. diameter and 4 ft long into the bending machine and activated the foot control switch to begin the cycle. The cycle did not start, so Employee #1 proceeded to reach forward over the safety mat to adjust the inserted tube. As the employee grappled the tube with her right hand, the machine cycled causing the clamp on the machine to close and pinching her index finger. Employee #1 immediately stepped on the safety mat and stopped the machine. The employee turned and asked a nearby coworker to disengage the clamp to remove her finger. Employee #1 reported to an area hospital, where she was treated for an amputation of the index finger of the right hand. Employee #1 was released after forty-two hours.

Keywords: AMPUTATED, FINGER, MACHINE OPERATOR, CAUGHT BY, BENDING MACHINE, NIP POINT, HAND

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 316346345 Hospitalized injury Amputation Occupation not reported
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close