Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 315530733 - Citek Tape Drive Repairs Specialists Dba Integrity

Inspection Information - Office: Ca Santa Ana District Office

Nr: 315530733Report ID: 0950631Open Date: 09/14/2012

Citek Tape Drive Repairs Specialists Dba Integrity
1953 N. Main St
Orange, CA 92865
Union Status: NonUnion
SIC: 3499/Fabricated Metal Products, Not Elsewhere Classified
NAICS: 336360/Motor Vehicle Seating and Interior Trim Manufacturing

Inspection Type:Complaint
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:12/18/2012
Planning Guide: Safety-Manufacturing Close Case:09/25/2018

Related Activity:TypeIDSafetyHealth
 Complaint208858506 Yes Yes
 Accident102818150    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 4 5
Current Violations 1 4 5
Initial Penalty $12,800 $0 $0 $6,000 $0 $18,800
Current Penalty $5,400 $0 $0 $5,400 $0 $10,800
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342 A 12/21/2012 12/26/2012 $5,000 $5,000 $0 01/14/2013 F - Formal Settlement
  2. 01002 Other 3203 A 12/21/2012 01/13/2013 $100 $250 $0 01/14/2013 F - Formal Settlement
  3. 01003 Other 3314 G 12/21/2012 01/13/2013 $100 $250 $0 01/14/2013 F - Formal Settlement
  4. 01004 Other 3314 J01 12/21/2012 01/13/2013 $200 $500 $0 01/14/2013 F - Formal Settlement
  5. 02001 Serious 3314 C 12/21/2012 01/13/2013 $5,400 $12,800 $0 01/14/2013 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 202555264Event: 07/06/2012Employee'S Fingers Are Crushed In Heavy-Duty Lathe Machine
On July 7, 2012, Employee #1 was operating a heavy-duty lathe (Model Number 29160C, Serial Number 0607). The employee was using this machine to resurface a rubberized industrial roller. As a part of the process, he had stopped the machine to measure the thickness of the roller that was to be resurfaced. While the employee was holding a micrometer around the roller with his right hand, he accidentally hit the start lever with his knee. When he leaned over the machine to measure the diameter of the roller, the employee's fingers on the right hand were caught in between the roller and the micrometer. The roller started rotating, crushing Employee #1's right middle and little fingers. The employee was taken to an area hospital, where he received surgery to repair the damage. The little finger was amputated at the first knuckle with the loss of 1 in. of the right middle finger. Employee #1 was hospitalized for about 31 hours.
Keywords: lathe, amputated, start button, measuring device, roller--const equip, finger, roller--mach/part, test equipment, crushed, hand
Inspection Degree Nature Occupation
1 315530733 Hospitalized injury Amputation Lathe and turning machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close