Translate
Inspection Detail
Inspection: 315527960 - Caran Precision Engineering & Mfg Corp
Inspection Information - Office: Santa Ana District Office
Site Address:
Caran Precision Engineering & Mfg Corp
4275 N Palm St
Fullerton, CA 92835
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3469
NAICS: 332116/Metal Stamping
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 04/18/2012
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 07/26/2013
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102772613 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 3 | 4 | |||
| Current Violations | 1 | 3 | 4 | |||
| Initial Penalty | $4,385 | $0 | $0 | $1,780 | $0 | $6,165 |
| Current Penalty | $2,250 | $0 | $0 | $1,155 | $0 | $3,405 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3314 C | 04/19/2012 | 04/24/2012 | $500 | $810 | $0 | 05/09/2012 | F - Formal Settlement | |
| 2. | 01002 | Other | 3314 G02 A | 04/19/2012 | 05/22/2012 | $375 | $605 | $0 | 05/09/2012 | F - Formal Settlement | |
| 3. | 01003 | Other | 3314 J02 | 04/19/2012 | 05/22/2012 | $280 | $365 | $0 | 05/09/2012 | F - Formal Settlement | |
| 4. | 02001 | Serious | 4207 A01 | 04/19/2012 | 04/24/2012 | $2,250 | $4,385 | $0 | 05/09/2012 | F - Formal Settlement |
Investigation Summary
At approximately 6:30 a.m. on February 16, 2012, Employee #1, a machine operator, was operating the company's "tabber machine," Verson All Steel press Company, Serial Number 19846-2078-50, under a supervisory coworker. Employee #1 tended the tabber machine when a rod jammed the machine and the ram stopped. He went to the rear of the machine and attempted to remove the jammed rod without first disconnecting the power to the machine. When the rod moved, the ram continued its cycle and crushed Employee #1's right hand. The supervisor had walked away from the accident site prior to the jam. Employee #1 was taken to the local medical center by emergency responders, where he was admitted for surgery on his crushed and lacerated right hand.
Keywords: METAL BAR, MACHINE OPERATOR, JAMMED, CRUSHED, LACERATION, HAND, MACHINE--MISC, RAM
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 315527960 | Hospitalized injury | Cut/Laceration | Punching and stamping press machine operators |