Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 315526434 - International Line Builders, Inc.

Inspection Information - Office: Ca Santa Ana District Office

Nr: 315526434Report ID: 0950631Open Date: 10/27/2011

International Line Builders, Inc.
2540 W. Lincoln Ave
Anaheim, CA 92804
Union Status: NonUnion
SIC: 1731/Electrical Work
NAICS: 238210/Electrical Contractors
Mailing: 2520 Rubidoux Blvd, Riverside, CA 92509

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:03/01/2012
Planning Guide: Safety-Construction Close Case:03/08/2012

Related Activity:TypeIDSafetyHealth

Accident Investigation Summary
Summary Nr: 202554119Event: 10/26/2011Employee Is Burned In Transformer Explosion
On October 26, 2011, Employee #1 was the foreman of a four-person crew working for a company that built and maintained electric power distribution systems. The crew was replacing an existing unfused 225 KVA pad mount transformer (PMT) with a new fused 300 KVA PMT. The existing overhead feed was to be replaced with a new underground feed for the new transformer. After crew members isolated the existing PMT from the overhead service, they realized that they neglected to identify the phase sequence. A rotation meter was to be used to identify the phase sequence, which required them to reconnect the overhead service. Temporary jumpers were used to reconnect the power from the overhead lines to the pothead feeding the PMT. Employee #1 was located directly in front of the PMT with an 8-ft hot stick attached to the PMT switch to reenergize its secondary side. A coworker was standing on the back side of the PMT, holding the rotation meter that was connected with long leads to the front of the PMT. When Employee #1 turned on the PMT switch with the hot stick, there was no reading on the rotation meter. Employee #1 turned off the PMT switch and asked the coworker to hold down the button on the meter to enable the reading. When Employee #1 again turned the on the PMT switch with the hot stick, the PMT exploded. Hot oil spewed out and ignited. Employee #1 was hospitalized with first- and second-degree burns to his face, hands, and upper back. The coworker sustained minor burns to his face.
Keywords: burn, electrical testing, electrician, fire, lubricating fluid, test equipment, explosion, face, transformer, hand
Inspection Degree Nature Occupation
1 315526434 Hospitalized injury Burn/Scald(Heat) Electricians

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.