Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 315448340 - Peak Steel Llc

Inspection Information - Office: Nc Raleigh

Nr: 315448340Report ID: 0453710Open Date: 05/27/2011

Peak Steel Llc
8605 Ebemezer Church Road
Raleigh, NC 27613
Union Status: NonUnion
SIC: 3499/Fabricated Metal Products, Not Elsewhere Classified
NAICS: 332999/All Other Miscellaneous Fabricated Metal Product Manufacturing
Mailing: 1610 N. Salem St., Apex, NC 27502

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:09/23/2011
Planning Guide: Safety-Construction Close Case:11/15/2011
Emphasis: L:Commcon, S:Construction Sep

Related Activity:TypeIDSafetyHealth
 Accident100362334    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 1 1
Initial Penalty $2,500 $0 $0 $0 $0 $2,500
Current Penalty $1,500 $0 $0 $0 $0 $1,500
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19260756 A01 09/27/2011 09/30/2011 $1,500 $1,500 $0 I - Informal Settlement
Deleted 2. 01002 Serious 19260501 C03 09/27/2011 09/30/2011 $0 $1,000 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 200357432Event: 05/27/2011Employee Is Injured When Struck By Falling Beam, Later Dies
On May 27, 2011, a contractor was erecting a steel frame of a building under construction. The structure was a curved piece of structural steel weighing approximately 700 pounds. The connector was working from the basket of a JLG lift to install the steel when it was noticed the beam had a twist which prevented it from being properly seated on the support brackets. It was decided to loosen the three bolts holding the beam to support beams of the building. The superintendent told the employee to stand to the side while the correction was made. The connector unbolted and removed two of the bolts holding the beam to the support beam and loosened the third bolt. The beam fell approximately 15 feet to the ground, striking a concrete floor section, rebounded and struck the employee in the upper back and neck. The employee was transported to the hospital where he underwent surgery to remove bone fragments from his neck. Thirteen days later, after time in intensive care and after being taken to a private room, the employee passed away due to possible pulmonary embolism.
Keywords: beam, embolism, welder, construction, neck, struck by, falling object, pulmonary embolism, contusion
Inspection Degree Nature Occupation
1 315448340 Fatality Bruise/Contus/Abras Welders and cutters

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close