Translate
Inspection Detail
Inspection: 315268342 - Ram Mechanical Inc
Inspection Information - Office: High Hazard Unit - North
Site Address:
Ram Mechanical Inc
530 S Tegner Rd
Turlock, CA 95380
Mailing Address:
3506 Moore Rd, Ceres, CA 95307
Union Status: Union
SIC:1711
NAICS: 238220/ Plumbing, Heating, and Air-Conditioning Contractors
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 08/16/2011
Emphasis: S:Construction (Cship)
Case Closed: 09/13/2011
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 101010338 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | ||||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $0 | $0 | $0 | $275 | $0 | $275 |
| Current Penalty | $0 | $0 | $0 | $275 | $0 | $275 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 1670 A | 08/16/2011 | 09/18/2011 | $275 | $275 | $0 | - |
Investigation Summary
At approximately 1:30 p.m. On June 2, 2011, Employee #1, of Ram Mechanical Inc., a licensed General Contractor, was installing an exhaust fan on the roof of the main production building at Peninsula Plastics Recycling Inc. Employee #1 and Employee #2 were in the process of installing an exhaust fan through the metal roof of the Production building at Peninsula Plastics Recycling Inc. The steel building was approximately 100 feet wide by 400 feet long. The roof was made of 18 gauge galvanized sheet metal and has a slope of 1:12. The hole being cut was at the approximate center of the structure. The peak of the roof was approximately 35 feet above floor level. Employee #1 was using a 4 inch right angle grinder with a cut-off wheel to cut the roofing metal. Employee #1 had made cuts on three sides of the intended hole of approximately 42 inches per side. Employee #1 had left "holding" metal on each cut side to support the metal and prevent it from falling through as the final cut was being made. Employee #1 repositioned himself for the final cut. As he started making the cut he inadvertently placed weight on the cut portion of the metal roofing causing it to give way. He fell through the opening head first. Employee #1 landed on a conveyor approximately 15 feet below the opening. Employee #1 sustained fractures to three thoracic vertebrae with fractures to the adjacent ribs and a laceration to the scalp. Employee #1 was transported by ambulance to the Emanuel Medical Center in Turlock; he was hospitalized for three days. The accident was caused by the employee inadvertently placing weight onto the already partially cut portion of the roof metal which subsequently gave way. Employee #3, the Office Manager for Ram Mechanical Inc. reported the injury to the Modesto District Office on June 2, 2011 at 1:30 p.m. A second notification was received by the Modesto District Office from the Turlock Police/Fire Dispatch on June 2, 2011 at 1:50 p.m. The reporting requirements were met. The HHU received the information on the accident from the Modesto District Office on July 12, 2011 and an inspection was opened on July 13, 2011.
Keywords: FRACTURE, HEAD, ROOF, WARNING LINE, FLOOR HOLE, LACERATION, RIB, FALL, FALL PROTECTION, VERTEBRA
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 315268342 | Hospitalized injury | Fracture | Sheetmetal duct installers |