Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 315068056 - Certified Ad Services

Inspection Information - Office: Ca Fresno

Nr: 315068056Report ID: 0950625Open Date: 01/07/2011

Certified Ad Services
909 W. Nielsen Ave
Fresno, CA 93706
Union Status: NonUnion
SIC: 2754/Commercial Printing, Gravure
NAICS: 323111/Commercial Gravure Printing

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:01/11/2011
Close Case:03/16/2011

Related Activity:TypeIDSafetyHealth
 Accident101082105    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $0 $0 $0 $700 $0 $700
Current Penalty $0 $0 $0 $700 $0 $700
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 4002 A 02/02/2011 03/07/2011 $700 $700 $0 -

Accident Investigation Summary
Summary Nr: 201494648Event: 08/02/2010Employee'S Hand Is Pulled Into Nip Point, Suffers Amputation
On August 2, 2010, Employee #1, a pressman, was operating a SMC stacker. He found debris under the machine and stooped down to get a closer look. He placed his right hand on the frame, and it made contact with a Glimmer type drive belt that was set approximately 4 in. from the frame and was partially hidden behind an electrical box. The second digit finger of his right hand was pulled into the in-running nip point created by the belt and pulley, causing it to be degloved. The subsequent amputation was at the distal interphalangeal joint. Employee #1 was not hospitalized. During the inspection of the equipment it was found that the subject stacker was a newer model. The older models were direct drive, while the newer models were driven by a belt and pulley. The employer was found to have an effective and well devised health and safety program, including hazardous energy control policies and procedures. In accordance with 8CCR 4002(a) the belt and pulley were required to be guarded.
Keywords: amputated, degloved, nip point, pulley, hand, unguarded
Inspection Degree Nature Occupation
1 315068056 Non Hospitalized injury Amputation Miscellaneous printing machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close