Translate
Inspection Detail
Inspection: 314794371 - Group Manufacturing Services, Inc.
Inspection Information - Office: Fremont District Office
Site Address:
Group Manufacturing Services, Inc.
1928 Hartog Drive
San Jose, CA 95131
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3444
NAICS: 332322/Sheet Metal Work Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 05/23/2011
Emphasis:
Case Closed: 04/14/2012
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102732906 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 3 | 3 | 6 | |||
| Current Violations | 2 | 4 | 6 | |||
| Initial Penalty | $24,970 | $0 | $0 | $975 | $0 | $25,945 |
| Current Penalty | $3,465 | $0 | $0 | $2,300 | $0 | $5,765 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 A04 | 06/15/2011 | 08/01/2011 | $100 | $365 | $0 | 06/23/2011 | F - Formal Settlement | |
| 2. | 01002 | Other | 3382 A | 06/15/2011 | 06/20/2011 | $100 | $365 | $0 | 06/23/2011 | F - Formal Settlement | |
| 3. | 01003 | Other | 25000010 A | 06/15/2011 | 06/20/2011 | $100 | $245 | $0 | 06/23/2011 | F - Formal Settlement | |
| 4. | 02001 | Other | 3203 A07 | 06/15/2011 | 06/20/2011 | $2,000 | $16,200 | $0 | 06/23/2011 | F - Formal Settlement | |
| 5. | 03001 | Serious | 4214 A | 06/15/2011 | 07/08/2011 | $315 | $4,385 | $0 | 06/23/2011 | F - Formal Settlement | |
| 6. | 04001 | Serious | 4231 A | 06/15/2011 | 06/20/2011 | $3,150 | $4,385 | $0 | 06/23/2011 | F - Formal Settlement |
Investigation Summary
At approximately 8:30 a.m. on March 9, 2011, Employee #1, a welder, was using a "Max Mfg Co. (Model No. 12NS)" 12-inch cutoff saw to cut a 1.25-inch by 1.5-inch by 4-inch aluminum part down to 0.5-inch by 0.5-inch for template welding. Employee #1 placed the part on the table. He held the part with his left hand, and pulled down the saw handle with his right hand. He pulled the handle down slowly, and the force of the high-speed blade caused the part to be kicked out. Employee #1's left thumb made contact with the moving blade and was partially amputated
Keywords: KICK BACK, AMPUTATED, STRUCK AGAINST, WELDER, THUMB, ELECTRIC SAW, SAW
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 314794371 | Non Hospitalized injury | Amputation | Welders and cutters |