Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 313387706 - Security Paving Inc

Inspection Information - Office: Bakersfield District Office

Nr: 313387706Report ID: 0950647Open Date: 09/20/2012

Security Paving Inc
Westside Parkway Calloway Dr
Bakersfield, CA 93312
Union Status: Union
SIC: 1611/Highway and Street Construction, Except Elevated Highways
NAICS: 237310/ Highway, Street, and Bridge Construction
Mailing: 9050 Norris Ave, Sun Valley, CA 91352

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:02/20/2013
Emphasis: S:Construction (Cship)Close Case:10/15/2014

Related Activity:TypeIDSafetyHealth
 Accident102626736    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations
Initial Penalty $27,000 $0 $0 $0 $0 $27,000
Current Penalty $0 $0 $0 $0 $0 $0
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Serious 3203 A07 02/21/2013 03/03/2013 $0 $9,000 $0 03/08/2013 J - ALJ Decision
Deleted 2. 02001 Serious 1511 B 02/21/2013 03/03/2013 $0 $18,000 $0 03/08/2013 J - ALJ Decision

Accident Investigation Summary
Summary Nr: 202457933Event: 08/28/2012Backing Dump Truck Pins And Crushes Paving Worker
At approximately 12:48 p.m. on August. 28, 2012, Employee #1, a 33-year-old male paving worker with Security Paving Inc., was cleaning concrete from the paving machine trough when a dump truck driven by a worker of another Employer backed up pinning Employee #1 between the dump box and the trough of the paving machine. Employee #1 sustained a bilateral fracture to his pelvis. Employee #1 was standing on the concrete surface of the new West-side parkway project at the westbound on ramp to the parkway from Calloway Drive. The dump truck was a Kenworth three-axle 10-12 yard dump truck, serial number: 1XKWD69X2RR620833, plate number: 7X46770, and the paving machine was a Gomaco Model 9,500, serial number: 905500-168. The width of the trough was one hundred and thirty one inches and a height from the ground to the top of the trough was approximately thirty-six inches. The causal factors were that the dump truck driver did not exit his truck to verify that all equipment and personnel were clear from behind the dump truck prior to backing the dump truck to the paving machine to unload the concrete in the dump truck box. The Employer was a general engineering contractor on the Westside Parkway project for the City of Bakersfield and the State of California. Employee #1 was a permanent full time employee of the Employer.
Keywords: fracture, highway, pinned, construction, struck by, backing up
Inspection Degree Nature Occupation
1 313387706 Hospitalized injury Fracture Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close