TranslateInspection Detail
Inspection: 313162232 - Champ Steel
|
Inspection Information - Office: Ca Santa Ana District Office | ||||
| Nr: 313162232 | Report ID: 0950631 | Open Date: 09/21/2009 | ||
| Champ Steel | ||||
| 5301 Bolsa Ave Huntington Beach, CA 92647 | Union Status: NonUnion | |||
| SIC: 1542/General Contractors-Nonresidential Buildings, Other than Industrial Buildings and Warehouses | ||||
| NAICS: 236220/Commercial and Institutional Building Construction | ||||
| Mailing: 633 E Young St, Santa Ana, CA 92705 | ||||
| Inspection Type: | Accident | |||
| Scope: | Partial | Advanced Notice: | N | |
| Ownership: | Private | |||
| Safety/Health: | Safety | Close Conference: | 02/25/2010 | |
| Planning Guide: | Safety-Construction | Close Case: | 02/06/2012 | |
| Emphasis: | S:Construction (Cship) | |||
| Related Activity: | Type | ID | Safety | Health |
| Accident | 102587904 | |||
| Complaint | 207364704 | Yes | ||
| Serious | Willful | Repeat | Other | Unclass | Total | |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 2 | 3 | |||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $7,200 | $0 | $0 | $1,600 | $0 | $8,800 |
| Current Penalty | $0 | $0 | $0 | $800 | $0 | $800 |
| FTA Amount | $0 | $0 | $0 | $0 | $0 | $0 |
| # | ID | Type | Standard | Issuance | Abate | Curr$ | Init$ | Fta$ | Contest | LastEvent | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Deleted | 1. | 01001 | Other | 1509 A | 02/25/2010 | 03/02/2010 | $800 | $800 | $0 | 03/11/2010 | F - Formal Settlement |
| 2. | 01002 | Other | 3646 A03 | 02/25/2010 | 03/02/2010 | $800 | $800 | $0 | 03/11/2010 | F - Formal Settlement | |
| Deleted | 3. | 02001 | Serious | 1511 B | 02/25/2010 | 03/02/2010 | $0 | $7,200 | $0 | 03/11/2010 | F - Formal Settlement |
Accident Investigation Summary | ||||||
|---|---|---|---|---|---|---|
| Summary Nr: 202550638 | Event: 09/21/2009 | Welder Is Killed In Fall When Scissor Lift Tips Over | ||||
| On September 21, 2009, Employee #1, a journeyman welder with a structural steel fabrication and erection company, was on a Condor Manufacturing Scissor Lift (Serial Number V1800829H) at an approximate height of 13 ft marking a structural beam for a brief welding job. The lift was positioned on a level concrete slab approximately 12 in. from a ledge (7.5 in. deep and approximately 36 in. wide) surrounding a concrete pit (19 ft by 20 ft by 69 in. deep). According to witnesses, Employee #1 was at the lift's controls when it slowly drove off the ledge, tipped over, and fell on its side. Employee #1 was ejected from the basket, his head struck the pit wall, and he landed on the pit floor. He was killed. | ||||||
| Keywords: beam, ejected, head, uneven ground, welder, steel erection, pit, aerial lift, inattention | ||||||
| Inspection | Degree | Nature | Occupation | |||
| 1 | 313162232 | Fatality | Other | Welders and cutters | ||