Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 310490438 - Valmont George Industries Inc

Inspection Information - Office: Ca Pico Rivera

Nr: 310490438Report ID: 0950642Open Date: 01/15/2008

Valmont George Industries Inc
4116 Whiteside St
Los Angeles, CA 90063
Union Status: NonUnion
SIC: 3471/Electroplating, Plating, Polishing, Anodizing, and Coloring
NAICS: 332813/ Electroplating, Plating, Polishing, Anodizing, and Coloring
Mailing: 4116 Whiteside St, Los Angeles, CA 90063

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:06/13/2008
Close Case:03/10/2009

Related Activity:TypeIDSafetyHealth
 Accident102472123    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2 4
Current Violations 2 2 4
Initial Penalty $22,050 $0 $0 $5,650 $0 $27,700
Current Penalty $4,500 $0 $0 $1,000 $0 $5,500
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342 A 06/13/2008 07/31/2008 $750 $5,000 $0 06/26/2008 F - Formal Settlement
  2. 01002 Other 3212 A01 06/13/2008 07/31/2008 $250 $650 $0 06/26/2008 F - Formal Settlement
  3. 02001 Serious 23400017 A 06/13/2008 07/31/2008 $2,250 $5,850 $0 06/26/2008 F - Formal Settlement
  4. 03001 Serious 3273 A 06/13/2008 07/31/2008 $2,250 $16,200 $0 06/26/2008 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 202454500Event: 12/18/2007Employee Is Burned By Chemical Splash Of Sulfuric Acid
On December 18, 2007, Employee #1 was cleaning the copper plates at the far end of the anodizing tanks. The copper plates are routinely cleaned on a daily basis using a green hand held abrasive scrubber. The plates are rectangle in design and are approximately 6 inches by 24 inches in length. Employee #1 had cleaned two other copper plate pads, and was in the process of cleaning the copper plate pad on Tank Number 17. The accident occurred when he turned his body and the radio phone that was clipped to the side of his body got caught on one of the PVC valves. The movement of his body pulled on the valve and the PVC pipe broke, releasing the BCS 51 sulfuric acid that was carried through the PVC pipe and it sprayed acid over the left side of his body. Employee #1 was able to remove himself from the area and went to the shower station and flushed his body with water. A coworker administered first aid by applying a burn ointment to Employee #1's burned area. After being given first aid at the worksite, Employee #1 drove himself home and later to the industrial clinic, where he was assessed as having received first degree burns on his left upper arm, back area, wrist area and inner left thigh. Employee #1 was released to moderate duty, but in a few days developed an infection from the burns and was admitted to the hospital. Surgery was necessary to perform skin grafts to his left inner thigh. Employee #1 remained in the hospital for approximately 10 days. As a result of the investigation, the following conclusions were arrived at: There is no clear walking path where the copper plates are at the south end of the anodizing tanks. The PVC and copper piping and equipment are arranged in such a way that there is no clear path to access and clean the copper plates in a safe manner. The path leading to the accident area is congested with many obstructions from piping and equipment, making it very difficult for someone to maneuver.
Keywords: burn, thigh, back, valve, pipe, arm, sulfuric acid, tank, chemical, wrist
Inspection Degree Nature Occupation
1 310490438 Hospitalized injury Burn(Chemical) Machinery maintenance occupations

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close