Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $14,400 $0 $0 $0 $0 $14,400
Current Penalty $3,600 $0 $0 $0 $0 $3,600
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 3328 E 08/03/2007 08/10/2007 $3,600 $14,400 $0 08/20/2007 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 202464756 Event: 04/14/2007Employee'S Thumb Amputated By Falling Machine Part
At 4:30 p.m. on April 14, 2007, Employee #1 was working as a floor hand on an oil well production rig. He had been employed by the employer for approximately six years. Employee #1's supervisor was at the rig controls, operating the brake and directing the work. Employee #1 was on the floor, with a coworker who was on the opposite side. Employee #1 bent down to remove the slips and lost his balance. He put his hand on the sub-base to maintain his balance, with the stripper still in place. When his hand contacted the sub-base, the stripper fell, crushing and amputating his left thumb. The rig was an Ideco Rambler Rig (serial number: #1046).
Keywords: amputated, dismantling, thumb, oil well servicing, struck by, lost balance, oil rig, unstable position
Inspection Degree Nature Occupation
1 310197231 Non Hospitalized injury Amputation Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.