Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 310091020 - Bimbo Bakeries Usa

Inspection Information - Office: Ca Foster City District Office

Nr: 310091020Report ID: 0950613Open Date: 09/28/2006

Bimbo Bakeries Usa
264 South Spruce Ave.
South San Francisco, CA 94080
Union Status: Union
SIC: 5461/Retail Bakeries
NAICS: 311811/Retail Bakeries

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:10/05/2006
Close Case:12/31/2006

Related Activity:TypeIDSafetyHealth
 Accident101129047    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 1 1
Initial Penalty $0 $0 $0 $1,800 $0 $1,800
Current Penalty $0 $0 $0 $1,200 $0 $1,200
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Other 3203 A 10/05/2006 11/07/2006 $0 $600 $0 10/16/2006 D - Govt Dismissed
  2. 01002 Other 3314 C01 10/05/2006 11/07/2006 $1,200 $1,200 $0 10/16/2006 W - Empr Withdrew

Accident Investigation Summary
Summary Nr: 201126000Event: 09/10/2006Employee'S Fingertip Is Amputated In Machine
At approximately 12:20 p.m. on September 10, 2006, Employee #1 was checking adjustments made by two engineers to a clutch and belt of a machine Label Master R5, Type 872-700, manufactured by Kwik-Lok. In order to review the belt alignment, the machine had to be in operation. Employee #1 was authorized to review and observe the belt alignment. While Employee #1 was observing the belt alignment, he noticed that a screw and bolt were missing next to the pulley. As Employee #1 put his right index finger to point it out, his finger got caught in the nip point, between pulley and the belt. That resulted in smashing his finger bone, the first part of knuckle including complete nail. Employee #1 was taken to the hospital where his finger tip was amputated. He came back to work next day. Employer failed to train Employee #1 thoroughly as required by manufacturer's manual.
Keywords: amputated, repair, belt, finger, clutch, caught between, untrained
Inspection Degree Nature Occupation
1 310091020 Non Hospitalized injury Amputation Stationary engineers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close