Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 309863397 - Mclean Packaging Corp.

Inspection Information - Office: Allentown

Nr: 309863397Report ID: 0317900Open Date: 04/02/2007

Mclean Packaging Corp.
149 W. Prospect St.
Nazareth, PA 18064
Union Status: NonUnion
SIC: 2653/Corrugated and Solid Fiber Boxes
NAICS: 322211/Corrugated and Solid Fiber Box Manufacturing
Mailing: P.O. Box 180, Broad St. & Easton Rd., Nazareth, PA 18064

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:05/08/2007
Emphasis: S:Fall From HeightClose Case:06/07/2007

Related Activity:TypeIDSafetyHealth

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations 1 1
Initial Penalty $1,375 $0 $0 $0 $0 $1,375
Current Penalty $1,375 $0 $0 $0 $0 $1,375
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001A Serious 19100023 E03 I 05/29/2007 06/01/2007 $1,375 $1,375 $0 -
  2. 01001B Serious 19100024 H 05/29/2007 06/01/2007 $0 $0 $0 -

Accident Investigation Summary
Summary Nr: 201320942Event: 03/29/2007Employee Dies In Fall From Stair
At approximately 2:40 p.m. on March 29, 2007, an employee, maintenance electrician had been assigned by his supervisor to install a motion sensing spot light at the top of a stair. The stair was not normally used by employees in the course of their daily work activities as the Vice President and General Manager used the second floor room for off hour's functions such as working out on his tread mill and to conduct practice sessions for his band. According to the sole eye witness, a forklift operator, the employee had completed the installation of the light and they were in the process of adjusting the motion detector sensitivity. The employee had just come down from the step ladder, folded it and leaned it against the wall. The forklift operator stated that it seemed like the employee took one step back, lost his balance and went through the rail. Upon arrival of emergency Medical Services, the employee was unconscious. He died on April 1, 2007. The wooden top rail on the stair platform measured 1.25 inches by 2.25 inches. The rail had rounded edges as it was likely manufactured to serve as a stair hand rail. The OSHA construction requirements for wooden top and intermediate rails require a minimum of 2 inches by 4 inch lumber be utilized. The existing rail did not meet the requirements of a standard guard rail. The top rail measured 35.25 inches from the platform surface. Two rugs were placed on the platform effectively lowering that height by anther inch. There was no intermediate rail.
Keywords: head, maintenance, stair, electrician, fall, concussion, work surface
Inspection Degree Nature Occupation
1 309863397 Fatality Concussion Electronic repairers, communica. & indus. equip.

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.