Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 309437382 - Kibler Construction Company, Inc.

Inspection Information - Office: Maryland Hlth Reg 1

Nr: 309437382Report ID: 0352450Open Date: 10/17/2005

Kibler Construction Company, Inc.
West Bound Route 144, East Of Quinn Road
Frederick, MD 21701
Union Status: NonUnion
SIC: 1622/Bridge, Tunnel, and Elevated Highway Construction
NAICS: 237310/ Highway, Street, and Bridge Construction
Mailing: P.O. Box 408, 3332 Baltimore Boulevard, Finksburg, MD 21048

Inspection Type:Accident
Scope:Complete Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:10/17/2005
Planning Guide: Safety-Construction Close Case:01/23/2006
Emphasis: S:Hwy Street & Bridge Const

Related Activity:TypeIDSafetyHealth
 Accident102358439    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 1 3
Current Violations 2 1 3
Initial Penalty $1,750 $0 $0 $0 $0 $1,750
Current Penalty $1,137 $0 $0 $0 $0 $1,137
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Serious 19260651 L01 12/09/2005 12/14/2005 $437 $875 $0 I - Informal Settlement
  2. 02001 Serious 19260701 B 12/09/2005 12/14/2005 $700 $875 $0 I - Informal Settlement
  3. 03001 Other 19260416 E01 12/09/2005 12/14/2005 $0 $0 $0 -

Accident Investigation Summary
Summary Nr: 202357703Event: 11/01/2005Employee Is Injured While Operating Circular Saw
On November 1, 2005, Employee #1 was operating a DeWalt circular saw to cut notches, measuring 0.5-inches wide and 1-inch deep, into a piece of plywood to be used as part of a form for a bridge pillar. The saw was GFCI protected and powered by a generator, providing 110 volts of energy. The piece of notched wood was to be placed around a rebar inside of form that was being erected for concrete to be poured. This was one of several forms that were erected to construct pillars for a bridge. A coworker held the piece of plywood down on top of a nearby form, while Employee #1 kneeled in a walkway that was located that was formed around the pillars and made his cuts. As Employee #1 was cutting notches in the wood, he hit his arm on the guard rail of the walkway behind him and lost his balance. The saw kicked back and came into contact with his right leg, causing a laceration in his groin area. Employee #1 was transported to Frederick Memorial Hospital, where he received stitches to mend the laceration. The accident investigation revealed that Employee #1 manually held the saws bottom guard back to speed up the cutting.
Keywords: carpenter, guard, work rules, circular saw, saw, wood panel, laceration, hand tool, leg
Inspection Degree Nature Occupation
1 309437382 Non Hospitalized injury Cut/Laceration Carpenters

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close