Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 309296838 - Esselte Corp

Inspection Information - Office: Ca Santa Ana District Office

Nr: 309296838Report ID: 0950631Open Date: 11/07/2006

Esselte Corp
6280 Artesia Blvd
Buena Park, CA 90620
Union Status: NonUnion
SIC: 2675/Die-Cut Paper and Paperboard and Cardboard
NAICS: 322231/Die-Cut Paper and Paperboard Office Supplies Manufacturing

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:11/29/2006
Planning Guide: Safety-Manufacturing Close Case:08/20/2009

Related Activity:TypeIDSafetyHealth
 Accident102478781    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1 2
Current Violations 1 1 2
Initial Penalty $18,000 $0 $0 $5,000 $0 $23,000
Current Penalty $2,000 $0 $0 $5,000 $0 $7,000
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342 A 12/01/2006 12/06/2006 $5,000 $5,000 $0 -
  2. 02001 Serious 3314 D 12/01/2006 12/06/2006 $2,000 $18,000 $0 12/14/2006 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 201148145Event: 10/25/2005Employee Amputates Fingers In Printing Machine
On October 25, 2005, Employee #1 was working for a manufacturer of file folders and other office products. She was not a contract employee. Making these products requires die cutting and printing operations. The accident occurred on a Kempsmith Model Number 18 printing machine, with Serial Number 304. This print unit is a part of the F-107 line used for manufacturing file folders. The print unit has a set of three horizontally rolling cylinders, each 19 inches long, with 6 inch, 3.5 inch, and 3 inch diameters. During the setup operation, a rubber print plate with adhesive backing is installed on the 6 inch diameter cylinder to produce the imprint on the folders. At the time of this accident, Employee #1 was setting up a 10 inch by 8 inch print plate. She was jogging the cylinder via a jog button with her right hand while holding the print plate down on the cylinder with her left hand. While doing this, she got her left hand caught in the in-running rollers. She pulled her hand out of the rollers on her own. Employee #1 sustained degloving and a crushing injury to the index, middle, and ring fingers on her left hand. She lost about an inch of each of these three fingers and damaged the tips of the thumb and left little finger on her left hand as well. She was hospitalized for about 24 hours. The fingertips of the index, middle, and ring fingers on her left hand were amputated at the hospital.
Keywords: printing press, rotating parts, amputated, die cutting press, finger, roller--mach/part, caught between, paper, paper machine
Inspection Degree Nature Occupation
1 309296838 Hospitalized injury Amputation Miscellaneous printing machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close