Translate
Inspection Detail
Inspection: 307455378 - Cannon Fabrication Inc.
Inspection Information - Office: San Bernardino District Office
Site Address:
Cannon Fabrication Inc.
182 Granite Street, Suite 101
Corona, CA 92879
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3433
NAICS: 333414/Heating Equipment (except Warm Air Furnaces) Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 05/18/2005
Emphasis:
Case Closed: 03/11/2016
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 102439361 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 8 | 9 | |||
| Current Violations | 1 | 6 | 7 | |||
| Initial Penalty | $14,400 | $0 | $0 | $4,400 | $0 | $18,800 |
| Current Penalty | $6,800 | $0 | $0 | $300 | $0 | $7,100 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 461 C | 05/18/2005 | 06/02/2005 | $0 | $275 | $0 | 05/26/2005 | F - Formal Settlement | |
| 2. | 01002 | Other | 23400022 A | 05/18/2005 | 06/02/2005 | $100 | $275 | $0 | 05/26/2005 | F - Formal Settlement | |
| 3. | 01003 | Other | 4650 E | 05/18/2005 | 06/02/2005 | $0 | $275 | $0 | 05/26/2005 | F - Formal Settlement | Citation has been deleted. |
| 4. | 01004 | Other | 3328 C | 05/18/2005 | 06/02/2005 | $0 | $275 | $0 | 05/26/2005 | F - Formal Settlement | |
| 5. | 01005 | Other | 42080001 J02 A | 05/18/2005 | 06/02/2005 | $0 | $275 | $0 | 05/26/2005 | F - Formal Settlement | |
| 6. | 01006 | Other | 42080001 K04 | 05/18/2005 | 06/02/2005 | $0 | $275 | $0 | 05/26/2005 | F - Formal Settlement | Citation has been deleted. |
| 7. | 01007 | Other | 42080001 M02 | 05/18/2005 | 06/02/2005 | $0 | $275 | $0 | 05/26/2005 | F - Formal Settlement | |
| 8. | 02001 | Other | 4184 B | 05/18/2005 | 05/25/2005 | $200 | $2,475 | $0 | 05/26/2005 | F - Formal Settlement | |
| 9. | 03001 | Serious | 42080001 I01 | 05/18/2005 | 05/25/2005 | $6,800 | $14,400 | $0 | 05/26/2005 | F - Formal Settlement |
Investigation Summary
At approximately 2:05 p.m. on December 10, 2004, Employee #1 was operating a 175-ton Accupress, Model Number 717514, Serial Number 3613, press brake to bend a sheet of metal. The sheet measured 75-inches long by 4-inches wide and the press was set to operate using a 10 gauges and 90 degree angle. In addition, the back gauge was set at 2 inches. The employer specializes in metal fabrication. As Employee #1 was bending the first part of the sheet, he brought the upper die (ram) down by pressing a foot pedal. The sheet slipped back and both of Employee #1's index fingers became caught between the sheet and the bottom die. Employee #1 was transported to a near by hospital, where he was hospitalized and treated for his injury, which required surgery to his left index finger. The accident investigation revealed that the light curtains that were installed to safeguard the point of operation were not adjusted properly, allowing for his fingers to come into contact with the point of operation.
Keywords: AMPUTATED, PRESS BRAKE, FINGER, GUARD, MACHINE OPERATOR, WORK STATION, METAL SHEET, CAUGHT BETWEEN, CRUSHED
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 307455378 | Hospitalized injury | Amputation | Machine operators, not specified |