Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 307395871 - German Motors Collision Center

Inspection Information - Office: Ca San Francisco

Nr: 307395871Report ID: 0950611Open Date: 08/11/2006

German Motors Collision Center
1140 Harrison Street
San Francisco, CA 94103
Union Status: NonUnion
SIC: 7532/Top, Body, and Upholstery Repair Shops and Paint Shops
NAICS: 811121/ Automotive Body, Paint, and Interior Repair and Maintenance
Mailing: 1675 Howard Street, San Francisco, CA 94103

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:10/18/2006
Close Case:12/31/2008

Related Activity:TypeIDSafetyHealth
 Accident361561822    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 2 3
Current Violations 1 2 3
Initial Penalty $18,000 $0 $0 $5,750 $0 $23,750
Current Penalty $2,700 $0 $0 $5,075 $0 $7,775
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 342 A 10/20/2006 10/25/2006 $5,000 $5,000 $0 -
  2. 01002 Other 3542 D 10/20/2006 11/22/2006 $75 $750 $0 11/08/2006 F - Formal Settlement
  3. 02001 Serious 3328 C 10/20/2006 10/25/2006 $2,700 $18,000 $0 11/08/2006 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 201182961Event: 06/15/2006Employee'S Finger Is Smashed By Hydraulic Lift
On June 15, 2006, Employee #1, a journey level auto body technician, was assisting a coworker, an apprentice auto body technician, to repair a car (BMW E46) bumper. The car had been raised on a two-post surface-mounted electro-hydraulic lift (Rotary Number SPOA10N500, Serial Number: BVP04G0760; 10,000 lbs capacity). The repair was completed and Employee #1 attempted to lower the lift, which had been raised fully to approximately 80 in. He noted that the lift was lowered only on the power unit column side (right post). The coworker, who apparently knew that the lift was defective and had removed the cover of the locking latch at the defective side, instructed Employee #1 to hold the "locking latch dog" down with his finger. When they tried to lower the lift all the way down, the latch dog snapped back and crushed the tip of the employee's right index finger. Employee #1 was bleeding profusely and was driven to the Emergency Room of a local hospital by two other coworkers, where it was diagnosed as an amputation. Employee's wound was dressed, the recovered tip of the finger was disposed of, and the employee was sent home. Four days later, Employee #1 went to another medical facility and underwent surgery to reconstruct the amputation. The investigation showed that the lift's lock release cable was broken, and the employee attempted to disengage the locking latch by removing the latch cover and holding the latch open, manually.
Keywords: hydraulic lift, amputated, repair, automotive repair, finger, work rules, equipment failure
Inspection Degree Nature Occupation
1 307395871 Non Hospitalized injury Amputation Occupation not reported

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close