Translate
Inspection Detail
Inspection: 307185496 - B & G Millworks Inc
Inspection Information - Office: Monrovia District Office
Site Address:
B & G Millworks Inc
12522 Lakeland Rd
Santa Fe Springs, CA 90670
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:2434
NAICS: 337110/Wood Kitchen Cabinet and Countertop Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 09/12/2007
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 12/19/2008
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 101802635 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 2 | 1 | 3 | |||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $7,085 | $0 | $0 | $335 | $0 | $7,420 |
| Current Penalty | $0 | $0 | $0 | $225 | $0 | $225 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 3203 B | 09/12/2007 | 09/29/2007 | $0 | $335 | $0 | 10/05/2007 | F - Formal Settlement | Citation has been deleted. |
| 2. | 02001 | Serious | 3942 A | 09/12/2007 | 09/29/2007 | $0 | $4,050 | $0 | 10/05/2007 | F - Formal Settlement | Citation has been deleted. |
| 3. | 03001 | Other | 4312 | 09/12/2007 | 09/29/2007 | $225 | $3,035 | $0 | 10/05/2007 | F - Formal Settlement |
Investigation Summary
At approximately 11:30 a.m. on July 21, 2007, Employee #1 was operating a pneumatic Kreg single-spindle pocket-hole machine (Model No. DK 1100FP; Serial No. 218). This machine consisted of a press assembly with a clamp pad on top to hold wood panels during drilling. A drill assembly was at the bottom to drill a hole at an angle. A foot operated paddle actuates the machine. A guard was installed along the perimeter of the press. When the foot peddle was actuated, the press would descend to hold the wood panel tightly in position, and the machine would drill a hole. Employee #1 held a wood panel with his hands, and he actuated the foot peddle. His right middle finger, which was under the guard for the clamp pad, was amputated at the fingertip.
Keywords: AMPUTATED, DRILLING MACHINE, FINGER, GUARD, CAUGHT BY, CRUSHED, STRUCK BY, NIP POINT, PRESS
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 307185496 | Non Hospitalized injury | Amputation | Miscellaneous machine operators, n.e.c. |