Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 307168369 - Mr Crane Inc

Inspection Information - Office: Ca Pico Rivera

Nr: 307168369Report ID: 0950642Open Date: 05/08/2006

Mr Crane Inc
2000 Avenue Of The Stars
Los Angeles, CA 90067
Union Status: Union
SIC: 1791/Structural Steel Erection
NAICS: 238190/ Other Foundation, Structure, and Building Exterior Contractors
Mailing: 647 N Hariton St, Orange, CA 92868

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Safety/Health:Safety Close Conference:10/19/2006
Planning Guide: Safety-Construction Close Case:04/21/2008
Emphasis: S:Construction (Cship)

Related Activity:TypeIDSafetyHealth

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 1
Current Violations
Initial Penalty $0 $0 $0 $450 $0 $450
Current Penalty $0 $0 $0 $0 $0 $0
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
Deleted 1. 01001 Other 4965 I 10/20/2006 11/02/2006 $0 $450 $0 11/08/2006 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 202452769Event: 05/07/2006Ironworker Amputates Leg When Caught By Crane Cable
On May 7, 2006, Employee #1 and two coworkers were dismantling a tower crane, when an accident occurred. There were two employers involved in the accident. One was the "exposing" employer, which erected and dismantled the crane. The other was the "creating" or "correcting" employer. It owned the crane and provided technical assistance for the erection and dismantling procedures. Employee #1 and the first coworker were employed as ironworkers by the crane erection company, the "exposing" employer, at the time of the accident. Although Employee #1 was an experienced tilt-up construction rigger, the day of the accident was his first day working on a tower crane. Employee #1 and the first coworker were helping the second coworker, a technician from the crane owner, coil up a disconnected trolley line. The trolley line was a 0.625-inch diameter wire rope cable weighing 0.72 pounds per linear foot. The line had been disconnected from the trolley, which was retracted as close to the operator's cab as possible, and the line was suspended along the bottom of the crane jib via a 16-gauge double-looped wire at 13 to 19 foot intervals. The crane was a Model Number 630-ECH-H20 Liebherr with a 267-foot jib and Serial Number LE43806. It was 262 feet high. It was unusual in that the trolley drum had an auxiliary storage drum attached to the trolley drum. The crane manufacturer's manual said that this drum was for rereeving the loosened trolley line. During the dismantling of the trolley line, a special-size Allen wrench was required to release the storage drum. The technician for the crane owner company stated in an interview that he did not have the tool with him at that moment and that it was down in his truck. It is unclear from statements given to DOSH from the witnesses whether the technician offered to get the wrench or elected to coil the trolley line without the storage drum. It was established that the technician did begin coiling the trolley line on a floor plate in front of the trolley line, while being fed line by one of the ironworkers, either Employee #1 or the first coworker, working down the jib. Employee #1 had finished securing the dogged-off trolley with two slings and was standing on an elevated platform adjacent to the trolley drum, when the wire rope came loose from its coil and began to run down the jib. One of the coils of the wire rope ensnared Employee #1's ankle as it was falling down the jib and amputated his lower left leg. He was hospitalized.
Keywords: rigging, amputated, dismantling, wire rope, crane boom, falling object, crane, leg
Inspection Degree Nature Occupation
1 307168369 Hospitalized injury Amputation Construction laborers

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.