Translate
Inspection Detail
Inspection: 305473159 - Dynamic Cooking Systems Inc
Inspection Information - Office: Long Beach District Office
Site Address:
Dynamic Cooking Systems Inc
5800 Skylab Rd
Huntington Beach, CA 92647
Mailing Address:
, , 00000
Union Status: NonUnion
SIC:3631
NAICS: 335221/Household Cooking Appliance Manufacturing
Inspection Type: Accident
Scope: Partial
Advanced Notice: N
Ownership: Private
Safety/Health: Safety
Close Conference: 07/31/2003
Planning Guide: Safety-Manufacturing
Emphasis:
Case Closed: 07/09/2008
| Type | Activity Nr | Safety | Health |
|---|---|---|---|
| Accident | 362432346 |
| Violations/Penalties | Serious | Willful | Repeat | Other | Unclass | Total |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | ||||
| Current Violations | ||||||
| Initial Penalty | $0 | $0 | $0 | $5,000 | $0 | $5,000 |
| Current Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| FTA Penalty | $0 | $0 | $0 | $0 | $0 | $0 |
| # | Citation ID | Citaton Type | Standard Cited | Issuance Date | Abatement Due Date | Current Penalty | Initial Penalty | FTA Penalty | Contest | Latest Event | Note |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Other | 342 A | 08/01/2003 | 08/06/2003 | $0 | $5,000 | $0 | 03/10/2004 | F - Formal Settlement | Citation has been deleted. |
Investigation Summary
At approximately 8:50 a.m. on May 6, 2003, Employee #1 was working in the press brake department of a stove manufacturing facility operating a Darley Press Brake, Model Number EHP50 25/20, Serial Number 12508. He was using the press brake to bend a 10-pound piece of 18-gauge sheet metal that was 37 inches long by 18 inches wide with notches on all four sides. While standing in front of the press brake, he held the top of the sheet metal with his left hand and the right side with his right hand. He was wearing white fabric gloves with black rubber dots on them. As he was turning the piece over, his left hand slipped downward and fell sideways to the left. The piece of sheet metal hit his left forearm and made a 4-inch laceration. He was hospitalized for 3 days with his injuries.
Keywords: SHEET METAL, PRESS BRAKE, SLIP, LACERATION, ARM
| # | Inspection | Age | Sex | Degree of Injury | Nature of Injury | Occupation |
|---|---|---|---|---|---|---|
| 1 | 305473159 | Hospitalized injury | Cut/Laceration | Punching and stamping press machine operators |