Inspection Detail

Inspection: 305347882 - Rami Designs

Inspection Information - Office: Santa Ana District Office

Inspection Nr: 305347882

Report ID: 0950631

Date Opened: 09/12/2002

Site Address:
Rami Designs
3211 S Halladay St
Santa Ana, CA 92705

Mailing Address:
, , 00000

Union Status: NonUnion

SIC:3544

NAICS: 0

Inspection Type: Accident

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Safety

Close Conference: 09/12/2002

Emphasis:

Case Closed: 09/13/2010

Related Activity
Type	Activity Nr	Safety	Health
Accident	362362782

Violation Summary
Violations/Penalties	Serious	Willful	Repeat	Other	Unclass	Total
Initial Violations	1			1		2
Current Violations	1			1		2
Initial Penalty	$12,600	$0	$0	$350	$0	$12,950
Current Penalty	$12,600	$0	$0	$350	$0	$12,950
FTA Penalty	$0	$0	$0	$0	$0	$0

Violation Items
#	Citation ID	Citaton Type	Standard Cited	Issuance Date	Abatement Due Date	Current Penalty	Initial Penalty	FTA Penalty	Contest	Latest Event	Note
1.	01001	Other	342 A	01/21/2003	01/24/2003	$350	$350	$0		-
2.	02001	Serious	4002 A	01/21/2003	01/24/2003	$12,600	$12,600	$0		-

Investigation Summary

Investigation Nr: 201142890

Event: 05/21/2002

Employee injured when sleeve entangled in cutting mill

At 1:00 p.m. on May 21, 2002, an accident occurred at a machine shop. The employer reported the accident four months later, on August 19, 2002. Employee #1 had inserted the cutting mill into the collet chuck of a Bridgeport mill. He adjusted the cutting assembly from its usual vertical position into an approximately 45-degree angle. Employee #1 then turned on the mill so that the cutting assembly was revolving at cutting speed. He reached past the angled, revolving cutting assembly with his arm to adjust the coolant flow. Employee #1's long sleeve shirt became entangled with the rapidly revolving cutting assembly. Employee #1 suffered a compound fracture of his right arm and was hospitalized.

Keywords: FRACTURE, CAUGHT BY, MILLING MACHINE, ARM

Investigated Inspection
#	Inspection	Age	Sex	Degree of Injury	Nature of Injury	Occupation
1	305347882			Hospitalized injury	Fracture	Milling and planing machine operators

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.