Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 300865011 - Superior Engineered Products Corporation

Inspection Information - Office: Ca San Bernardino

Nr: 300865011Report ID: 0950633Open Date: 02/26/2004

Superior Engineered Products Corporation
1750 S Archibald Ave
Ontario, CA 91761
Union Status: NonUnion
SIC: 3089/Plastics Products, Not Elsewhere Classified
NAICS: 326199/All Other Plastics Product Manufacturing
Mailing: 1650 S Archibald Ave, Ontario, CA 91761

Inspection Type:Accident
Scope:Partial Advanced Notice:N
Ownership:Private
Safety/Health:Safety Close Conference:07/12/2004
Planning Guide: Safety-Manufacturing Close Case:03/01/2013

Related Activity:TypeIDSafetyHealth
 Accident101154268    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 1 2 3
Current Violations 1 1 2
Initial Penalty $18,000 $0 $0 $5,185 $0 $23,185
Current Penalty $2,700 $0 $0 $150 $0 $2,850
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other 3203 A04 07/29/2004 08/03/2004 $150 $185 $0 08/25/2004 F - Formal Settlement
Deleted 2. 01002 Other 342 A 07/29/2004 08/03/2004 $0 $5,000 $0 08/25/2004 F - Formal Settlement
  3. 02001 Serious 3384 B 07/29/2004 08/03/2004 $2,700 $18,000 $0 08/25/2004 F - Formal Settlement

Accident Investigation Summary
Summary Nr: 201159050Event: 02/05/2004Employee'S Finger Is Amputated When Caught In Drill Press
At 8:30 a.m. on February 5, 2004, Employee #1, a machinist, was assigned by the steel department supervisor to drill holes in 2-ft long metal strips. The holes were pre-marked. Employee #1 was operating a 24-in. Bickford Drill press, Serial Number 972-03826-64 with a 0.375-in. drill bit. Employee #1 set a metal strip in the vice below the drill and manually lowered the bit. He drilled the hole, raised the drill bit and put the machine in neutral. Employee #1 loosened the vice and used his right hand to move the metal piece forward, so that he could drill the next hole. Employee #1's gloved finger became entangled in the rotating bit, and his right ring finger was amputated. The finger could not be reattached. Employee #1 was hospitalized for more than 24 hours. The employer requires employees to wear gloves while working with or handling metal pieces.
Keywords: rotating parts, stripping machine, amputated, steel, finger, glove, caught by, drill press
Inspection Degree Nature Occupation
1 300865011 Hospitalized injury Amputation Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close