Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Inspection: 300709896 - Cannon Oil & Gas Well Service Inc

Inspection Information - Office: Wyoming

Nr: 300709896Report ID: 0855610Open Date: 06/20/1999

Cannon Oil & Gas Well Service Inc
Waltman 29, Cave Gulch, Sw4/Nw4/Sec 31/T37n/R86w
Arminto, WY 82630
Union Status: NonUnion
SIC: 1389/Oil and Gas Field Services, Not Elsewhere Classified
Mailing: P. O. Box 2086, Rock Springs, WY 82902

Inspection Type:Accident
Scope:Partial Advanced Notice:Y
Ownership:Private
Safety/Health:Safety Close Conference:06/20/1999
Emphasis: L:Oilserv, N:PetroClose Case:03/16/2000

Related Activity:TypeIDSafetyHealth
 Accident100980192    

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2 4
Current Violations 2 2 4
Initial Penalty $1,250 $0 $0 $0 $0 $1,250
Current Penalty $1,250 $0 $0 $0 $0 $1,250
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001 Other OS030001 C 09/14/1999 10/14/1999 $0 $0 $0 -
  2. 01003 Serious OS050008 B 09/14/1999 10/14/1999 $625 $625 $0 -
  3. 01004 Serious OS060005 J 09/14/1999 10/14/1999 $625 $625 $0 -
  4. 01005 Other 19100024 E 09/14/1999 10/14/1999 $0 $0 $0 -

Accident Investigation Summary
Summary Nr: 200980142Event: 06/19/1999Employee Killed When Struck By Traveling Block And Wire Rope
Employee #1, a derrickman, was working on a crew that was engaged in a snubbing operation to insert production tubing into a new gas well that was under pressure. He was in the snubbing basket while the crew was using a process called piggybacking to hoist up sections of tubing to the work platform, where it was inserted into the well. Piggybacking involved using sash cord to connect sections of tubing in a continuous chain. As Employee #1 was working, a section of tubing became caught on the snubbing basket and caused the sash cord to break. The tubing fell and sheared a hydraulic fitting on the blowout preventer (bop). This released the hydraulic pressure and caused the annular to release natural gas into the work platform area. In an effort to stop the flow of natural gas, the rig operator quickly set the hand brake and proceeded to the remotely located bop panel. The brake on the vehicle became unset, allowing the traveling blocks and wire ropes to fall and strike Employee #1. He was killed.
Keywords: derrickman, gas well, hoisting mechanism, hand brake, unsecured, caught by, oil well servicing, struck by, hydraulic press, falling object
Inspection Degree Nature Occupation
1 300709896 Fatality Fracture Drillers, oil well

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close