Powered by GoogleTranslate

Inspection Detail

Inspection: 300704129 - Mar Com, Inc

Inspection Information - Office: Northwest Area Office

 

Inspection Nr: 300704129
Report ID: 1032700
Date Opened: 02/19/2003

Site Address:
Mar Com, Inc
8970 Bradford
Portland, OR 97203

Mailing Address:
, , 00000

Union Status: Union

SIC:3731

NAICS: 336611/Ship Building and Repairing


Inspection Type: Referral

Scope: Partial

Advanced Notice: N

Ownership: Private

Safety/Health: Health

Close Conference: 04/29/2003

Planning Guide: Health-Maritime

Emphasis:

Case Closed: 05/06/2003


Related Activity
Type Activity Nr Safety Health
Referral 200970390 Yes

Investigation Summary

Investigation Nr: 200970085
Event: 02/18/2003
Employee dies from burns from fire in manlift basket

On February 18, 2003, Employee #1, a boilermaker and welder, was in the basket of a manlift. The basket was 11 ft above the floor of the floating drydock. Employee #1 was welding steel reinforcements to the exterior, starboard, and stern of a barge in the drydock. The welding was being done using a wire-feed welder. The terminated end of the weld was approximately 17 ft above the floor of the drydock. A small rupture occurred in a hydraulic line of the manlift due to unknown causes. This released a fine spray of hydraulic oil, which was ignited by sparks from the welding. The fire was immediately responded to by other employees and extinguished with the lift in place. It was estimated that it took 2 to 4 minutes from the ignition of the fire until it was extinguished. At that time the basket was lowered to the floor of the drydock. Fire Bureau personnel moved Employee #1 from the basket to a stretcher to transport him to the hospital. At the hospital the attending physician determined that Employee #1 had 80-full-thickness burns. Employee #1 died on April 21, 2003.

Keywords: BURN, FIRE, WELDER, LUBRICATING FLUID, WELDING, HYDRAULIC LINE, SPARK

Investigated Inspection
# Inspection Age Sex Degree of Injury Nature of Injury Occupation
1 300704129 Fatality Burn/Scald(Heat) Welders and cutters
Back to Top

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close