TranslateInspection Detail
Inspection: 300567625 - Wisconsin Centrifugal
|
Inspection Information - Office: Madison | ||||
| Nr: 300567625 | Report ID: 0523300 | Open Date: 03/16/1999 | ||
| Wisconsin Centrifugal | ||||
| 905 East St. Paul Avenue Waukesha, WI 53188 | Union Status: NonUnion | |||
| SIC: 3325/Steel Foundries, Not Elsewhere Classified | ||||
| Mailing: 905 East St. Paul Avenue, Waukesha, WI 53188 | ||||
| Inspection Type: | Referral | |||
| Scope: | Partial | Advanced Notice: | N | |
| Ownership: | Private | |||
| Safety/Health: | Safety | Close Conference: | 03/30/1999 | |
| Close Case: | 05/24/1999 | |||
| Related Activity: | Type | ID | Safety | Health |
| Referral | 200800332 | Yes | ||
| Serious | Willful | Repeat | Other | Unclass | Total | |
|---|---|---|---|---|---|---|
| Initial Violations | 1 | 1 | ||||
| Current Violations | 1 | 1 | ||||
| Initial Penalty | $4,500 | $0 | $0 | $0 | $0 | $4,500 |
| Current Penalty | $2,500 | $0 | $0 | $0 | $0 | $2,500 |
| FTA Amount | $0 | $0 | $0 | $0 | $0 | $0 |
| # | ID | Type | Standard | Issuance | Abate | Curr$ | Init$ | Fta$ | Contest | LastEvent | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1. | 01001 | Serious | 19100212 A01 | 04/23/1999 | 05/06/1999 | $2,500 | $4,500 | $0 | I - Informal Settlement |
Accident Investigation Summary | ||||||
|---|---|---|---|---|---|---|
| Summary Nr: 200800118 | Event: 03/06/1999 | Employee Injured When Impaled By Metal Wire Brush Handle | ||||
| Employee #1 was working alone and operating a 16 in. vertical spin cast machine with a 17 in. diameter by 13 in. deep carbon die. A bronze casting in the die was complete, and the machine cover, five wedges that hold the die cover in place, and the die cover were all removed. He placed two wedges above the die to hold it in place while removing the casting. Water was then placed in the die and the machine was rotated to cool the die. Employee #1 observed the water during this process and then placed a wire brush in the rotating die to clean the bottom and sides. The wire brush was on a round metal handle that was 40 in. long by 3/4 in. diameter and had a 1 in. wide chisel point at the end. When Employee #1 moved the brush to the top of the die, it struck against one of the wedges and the long brush handle was pushed completely through Employee #1's abdomen, impaling him. He sustained puncture injuries, for which he was hospitalized. The speed settings for this casting were 500 rpm and the machine rotation tested after the accident was 175 rpm. | ||||||
| Keywords: rotating parts, abdomen, impaled, work rules, cleaning, caught by, extension handle, hand tool, die casting machine | ||||||
| Inspection | Degree | Nature | Occupation | |||
| 1 | 300567625 | Hospitalized injury | Puncture | Occupation not reported | ||