Powered by GoogleTranslate

Occupational Safety and Health Administration OSHA

Inspection Detail

Case Status: CLOSED

Case Status: CLOSED

Violation Summary
Serious Willful Repeat Other Unclass Total
Initial Violations 2 2
Current Violations 2 2
Initial Penalty $27,306 $0 $0 $0 $0 $27,306
Current Penalty $19,115 $0 $0 $0 $0 $19,115
FTA Amount $0 $0 $0 $0 $0 $0

Violation Items
# ID Type Standard Issuance Abate Curr$ Init$ Fta$ Contest LastEvent
  1. 01001A Serious 19100147 C04 II A 06/04/2021 08/16/2021 $9,558 $13,653 $0 I - Informal Settlement
Deleted 2. 01001B Serious 19100147 C04 II B 06/04/2021 07/01/2021 $0 $0 $0 I - Informal Settlement
Deleted 3. 01001C Serious 19100147 C04 II C 06/04/2021 07/01/2021 $0 $0 $0 I - Informal Settlement
  4. 01001D Serious 19100147 C04 II D 06/04/2021 08/16/2021 $0 $0 $0 I - Informal Settlement
  5. 01002 Serious 19100147 D 06/04/2021 08/16/2021 $9,558 $13,653 $0 I - Informal Settlement

Accident Investigation Summary
Summary Nr: 131676.015 Event: 12/09/2020Employee Is Killed When Struck By Board While Setting Up Lam
At approximately 12:00 p.m. on December 9, 2020, an employee who was a hymmen la minator line operator and a coworker were restringing laminate paper by hand th rough heated chrome rollers after a paper break occurred. On December 9, 2020, a t approximately 12:00 p.m., the employee was fatally injured while feeding paper into the hymmen laminator machine during setup operations. The employee used the employer's alternative energy isolation procedure which included turning the hymmen laminator line controls to manual, isolating sections of the line with a trap key system, and pushing a material table (small infrared table) out of the way, before entering between the powered glue application roller and chrome lam ination roller sections. The employee stood between the roller sections to hand -feed the tailpiece of laminate paper through the infeed side of the chrome lami nation rollers to a coworker standing on the outfeed side. An approximate 5 ft. x 6 ft. sheet of 5/8 in. thick medium-density fiberboard (MDF) automatically fe d through the powered glue application rollers striking the employee in the abdo men and pinning the employee against the chrome rollers. Emergency medical serv ices (EMS) were called and life-saving efforts of cardiopulmonary resuscitation (CPR) were initiated by fellow employees in the laminator area until EMS arrived on site and took over. The employee was killed
Keywords: abdomen, board, cpr, pinned, roller--mach/part, struck by
Inspection Degree Nature Occupation
1 1506004.015 Fatality Machine operators, not specified

Thank You for Visiting Our Website

You are exiting the Department of Labor's Web server.

The Department of Labor does not endorse, takes no responsibility for, and exercises no control over the linked organization or its views, or contents, nor does it vouch for the accuracy or accessibility of the information contained on the destination server. The Department of Labor also cannot authorize the use of copyrighted materials contained in linked Web sites. Users must request such authorization from the sponsor of the linked Web site. Thank you for visiting our site. Please click the button below to continue.

Close